Gear set, metal (for 2080X micro waterproof servo)
Replacement gear set for 2080X metal-gear servo. This gear set may be used to upgrade a standard 2080 servo (must replace all gears). Gears do not fit 2080A servo.
Accessory part for these models:
1/16
Showingof 4246 item(s)
Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
$5.00
Suspension arms, front (right), heavy duty (upper (1)/ lower (1))
Heavy-duty E-Revo suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings wi
Heavy-duty E-Revo suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings wi
$12.00
Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx)
$7.50
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)
Replacement part for these models:
Drag Slash
Maxx®
Slash 4X4 Ultimate
Replacement part for these models:
Drag Slash
Maxx®
Slash 4X4 Ultimate
$2.00
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)
Replacement part for these models:
Drag Slash
E-Revo® VXL B
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)
Replacement part for these models:
Drag Slash
E-Revo® VXL B
$12.00
Body mounts, front & rear/ body mount posts/ body mount sliders
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Ford® GT
Ford® Mustang GT
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Ford® GT
Ford® Mustang GT
$6.50
heelie bar
Replacement part for these models:
Rustler® 4X4 VXL
Accessory part for these models:
Rustler® 4X4
Replacement part for these models:
Rustler® 4X4 VXL
Accessory part for these models:
Rustler® 4X4
$10.00
LED light bar (Rigid®), TRX-4 (requires #8028 power supply)
The Rigid® LED light bar kit adds more candlepower to your TRX-4® Defender®. Requires #8028 power supply.The light bar also comes standard in the complete Defender Light Kit (#8095).
Accessory
The Rigid® LED light bar kit adds more candlepower to your TRX-4® Defender®. Requires #8028 power supply.The light bar also comes standard in the complete Defender Light Kit (#8095).
Accessory
$30.00
Half shafts, left or right (internal splined half shaft (2)/external splined half shaft) (2))/ metal u-joints (4)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
$6.00
Ball bearings, blue rubber sealed (20x27x4mm) (2)
Ball bearings, blue rubber sealed (20x27x4mm) (2)
Replacement part for these models:
Summit
Ball bearings, blue rubber sealed (20x27x4mm) (2)
Replacement part for these models:
Summit
$10.00
Titan® 775 High-Torque Power
High-torque gets its spin from the largest brushed motor offered by Traxxas, the Titan 775. This massive mill is equipped with a fan-cooled five-pole armature for non-stop off-road adventure, and an extra wrap of steel arou
High-torque gets its spin from the largest brushed motor offered by Traxxas, the Titan 775. This massive mill is equipped with a fan-cooled five-pole armature for non-stop off-road adventure, and an extra wrap of steel arou
$40.99
Nuts, 5mm flanged nylon locking (steel, black serrated) (8)
$4.00
Housings, differential (left & right)/ pinion collar (1)
Housings, differential (left & right)/ pinion collar (1)
Replacement part for these models:
T-Maxx®
Housings, differential (left & right)/ pinion collar (1)
Replacement part for these models:
T-Maxx®
$4.00
Ball bearings, blue rubber sealed (12x21x5mm) (2)
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
$8.00
Bumper D-Rings, gray (front or rear)/ 2x12 CS (4)
Gray bumper D-rings for TRX-4® bumpers.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4
Gray bumper D-rings for TRX-4® bumpers.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4
$3.00
Traxxas 5614 Differential kit, center (complete for E-Revo® & E-Maxx® (model 3905) (assembled with 500K oil) (for use only with single speed transmission))
$39.00
Suspension pin set (front or rear, hardened steel), 3x20mm (4), 3x40mm (2))
$4.75
Suspension screw pin set, hardened steel (hex drive)
$9.00
uspension arm set, adjustable wheelbase (lengthens wheelbase 10mm or 19mm) (suspension arm upper (2)/ suspension arm lower (2)/ bumper mount spacers (2)/ 4x16BCS (2))
Add an additional 10mm or 19mm of wheelbase extension to Revo, E-Revo and Summit in jus
Add an additional 10mm or 19mm of wheelbase extension to Revo, E-Revo and Summit in jus
$16.00
Suspension arm upper (1)/ suspension arm lower (1) (rear, left or right)
Suspension arm upper (1)/ suspension arm lower (1) (rear, left or right)
Replacement part for these models:
Revo®
Suspension arm upper (1)/ suspension arm lower (1) (rear, left or right)
Replacement part for these models:
Revo®
$7.50
Mount, telemetry expander (fits #3622 or 3622A chassis)
The telemetry expander mount provides a secure base to mount the optional TQi™ Telemetry Expander. Fits #3622 or #3622A chassis only.
The telemetry expander mount provides a secure base to mount the optional TQi™ Telemetry Expander. Fits #3622 or #3622A chassis only.
$8.00