Showingof 4246 item(s)
Shock caps (black) (4) (assembled with hollow balls)
$5.00
Sensor, temperature & voltage (fits X-Maxx®)
The temperature/voltage sensor plugs directly into your TQi™ receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a TQi radio wit
The temperature/voltage sensor plugs directly into your TQi™ receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a TQi radio wit
$12.00
Sway bar kit, Slayer (front and rear) (includes front and rear sway bars and adjustable linkage)
The Traxxas Slayer sway bar kit is a must have for Slayer racers everywhere. The kit was created, developed, and extensively field specifically for the Sla
The Traxxas Slayer sway bar kit is a must have for Slayer racers everywhere. The kit was created, developed, and extensively field specifically for the Sla
$30.00
Seal, stuffing tube (1)/ push rod (1)
Seal, stuffing tube (1)/ push rod (1)
Replacement part for these models:
DCB M41 Widebody
Spartan®
Seal, stuffing tube (1)/ push rod (1)
Replacement part for these models:
DCB M41 Widebody
Spartan®
$2.00
Shocks, GTR composite (assembled, without springs) (2)
Shocks, GTR composite (assembled, without springs) (2)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
TRX-4® Equipped with Traxx®
TRX-4® Traxx® Al
Shocks, GTR composite (assembled, without springs) (2)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
TRX-4® Equipped with Traxx®
TRX-4® Traxx® Al
$16.00
Turnbuckles, toe links, 72mm (2) (assembled with rod ends and hollow balls)
Turnbuckles, toe links, 72mm (2) (assembled with rod ends and hollow balls)
Replacement part for these models:
Slayer® Pro 4X4
Turnbuckles, toe links, 72mm (2) (assembled with rod ends and hollow balls)
Replacement part for these models:
Slayer® Pro 4X4
$9.00
Gear set, metal (for 2080X micro waterproof servo)
Replacement gear set for 2080X metal-gear servo. This gear set may be used to upgrade a standard 2080 servo (must replace all gears). Gears do not fit 2080A servo.
Accessory part for these models:
1/16
Replacement gear set for 2080X metal-gear servo. This gear set may be used to upgrade a standard 2080 servo (must replace all gears). Gears do not fit 2080A servo.
Accessory part for these models:
1/16
$18.00
Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
$5.00
Suspension arms, front (right), heavy duty (upper (1)/ lower (1))
Heavy-duty E-Revo suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings wi
Heavy-duty E-Revo suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings wi
$12.00
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)
Replacement part for these models:
Drag Slash
Maxx®
Slash 4X4 Ultimate
Replacement part for these models:
Drag Slash
Maxx®
Slash 4X4 Ultimate
$2.00
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)
Replacement part for these models:
Drag Slash
E-Revo® VXL B
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)
Replacement part for these models:
Drag Slash
E-Revo® VXL B
$12.00
Body mounts, front & rear/ body mount posts/ body mount sliders
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Ford® GT
Ford® Mustang GT
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Ford® GT
Ford® Mustang GT
$6.50
Wire harness, series battery connection (compatible with Traxxas® High Current Connector, NiMH only)
The Traxxas Y-harness doubles your voltage by combining two 7.2V NiMH batteries in series to unlock the 50+mph speed potential of your 1/16 scale brushle
The Traxxas Y-harness doubles your voltage by combining two 7.2V NiMH batteries in series to unlock the 50+mph speed potential of your 1/16 scale brushle
$8.00
Wheel nuts, splined, 17mm (blue-anodized) (4)
Wheel nuts, splined, 17mm (blue-anodized) (4)
Replacement part for these models:
Revo®
Summit
XO-1®
Accessory part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Drag Slash
Ford® F-150 R
Wheel nuts, splined, 17mm (blue-anodized) (4)
Replacement part for these models:
Revo®
Summit
XO-1®
Accessory part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Drag Slash
Ford® F-150 R
$10.00
LED light bar (chrome, 4 clear lights)
Add lights to the front of your truck with this chrome LED light bar. Includes 4 LED lights and wiring to plug into the receiver.
Accessory part for these models:
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Add lights to the front of your truck with this chrome LED light bar. Includes 4 LED lights and wiring to plug into the receiver.
Accessory part for these models:
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
$15.00
Big-bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
$26.95
LED light bar (Rigid®), TRX-4 (requires #8028 power supply)
The Rigid® LED light bar kit adds more candlepower to your TRX-4® Defender®. Requires #8028 power supply.The light bar also comes standard in the complete Defender Light Kit (#8095).
Accessory
The Rigid® LED light bar kit adds more candlepower to your TRX-4® Defender®. Requires #8028 power supply.The light bar also comes standard in the complete Defender Light Kit (#8095).
Accessory
$30.00
LED light set, complete with power supply (contains headlights, tail lights, side marker lights, & distribution block) (fits #8010 body)
$75.00
LED light set, complete with power supply (contains headlights, tail lights, side marker lights, distribution block, and power supply) (fits #8130 body)
$59.95
LED light set (contains headlights, tail lights, side marker lights, & distribution block) (fits #8010 body, requires #8028 power supply)
$55.00
LED light set (contains headlights, tail lights, roof lights, and distribution block) (fits #8811 or #8825 body, requires #8028 power supply)
$55.00
Half shafts, left or right (internal splined half shaft (2)/external splined half shaft) (2))/ metal u-joints (4)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
$6.00
Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Replacement part for these mode
Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Replacement part for these mode
$10.00
Nuts, 5mm flanged nylon locking (steel, serrated) (8)
Nuts, 5mm flanged nylon locking (steel, serrated) (8)
Replacement part for these models:
Nitro Rustler®
Slayer® Pro 4X4
T-Maxx®
Accessory part for these models:
Maxx®
Revo®
Unlimited Desert Ra
Nuts, 5mm flanged nylon locking (steel, serrated) (8)
Replacement part for these models:
Nitro Rustler®
Slayer® Pro 4X4
T-Maxx®
Accessory part for these models:
Maxx®
Revo®
Unlimited Desert Ra
$3.50