Showingof 4293 item(s)
Push rod (steel) (assembled with rod ends) (2) (use with progressive-2 rockers)
$7.00
Rod ends, heavy duty (push rod) (8) (assembled with hollow balls) (replacement ends for #8619, 8619G, 8619R, 8619X)
Replacement part for these models:
E-Revo® VXL Brushless
Replacement part for these models:
E-Revo® VXL Brushless
$8.00
Turnbuckles, 106mm (front tie rods) (2) (includes installed rod ends and hollow ball connectors)
$9.00
Forward only conversion kit (eliminates reverse)
$12.50
Gearbox halves (l&r) (black) w/ idler gear shaft
$8.00
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.
Replacement part
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.
Replacement part
$7.50
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
Big Bore Shock piston head set features 2-hole piston heads (2), 3-hole piston heads (2), and shock mounting bushings & washers (2).
Big Bore Shock piston head set features 2-hole piston heads (2), 3-hole piston heads (2), and shock mounting bushings & washers (2).
$2.50
Hardware kit, stainless steel, Spartan/DCB M41 (contains all stainless steel hardware used on Spartan and DCB M41)
$16.00
Shock caps (2)/ shock bottoms (2)
Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Nitro Rustler®
Nitro Slash
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash
Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Nitro Rustler®
Nitro Slash
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash
$3.00
Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (2)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
$5.00
Carriers, stub axle (left & right)
Replacement part for these models:
Maxx®
Maxx®Maxx®: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model# 89086-4)
Maxx®Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 89076-4)
Replacement part for these models:
Maxx®
Maxx®Maxx®: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model# 89086-4)
Maxx®Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 89076-4)
$6.00
Connector, wiring harness (EZ-Start® and EZ-Start® 2)
Connector, wiring harness (EZ-Start and EZ-Start 2)
Replacement part for these models:
Revo®
Slayer® Pro 4X4
TRX® 2.5R
TRX® 3.3
Connector, wiring harness (EZ-Start and EZ-Start 2)
Replacement part for these models:
Revo®
Slayer® Pro 4X4
TRX® 2.5R
TRX® 3.3
$5.00
Gear, locking differential output/ differential slider/ 3x12mm screwpin
$12.00
Battery door (For use with TQ and TQ-3 pistol grip transmitters)
$4.00
EZ-Start® system, complete
EZ-Start System, complete
Accessory part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
EZ-Start System, complete
Accessory part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
$39.99
hassis brace, rear (fits E-Revo®/Summit)
Chassis brace, rear (fits E-Revo / Summit)
Accessory part for these models:
E-Revo® VXL Brushless
E-Revo® VXL BrushlessE-Revo® VXL Brushless: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 86086-4)
Sum
Chassis brace, rear (fits E-Revo / Summit)
Accessory part for these models:
E-Revo® VXL Brushless
E-Revo® VXL BrushlessE-Revo® VXL Brushless: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 86086-4)
Sum
$10.00
Clutch bell (14-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust your truck's final drive ratio
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust your truck's final drive ratio
$12.00
lutch bell (17-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust Slayer’s final drive ratio for
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust Slayer’s final drive ratio for
$12.00
Sway bar kit (front and rear) (includes sway bars and linkage)
Jato is designed to be able to use sway bars. All the mounts and connectors are already integrated into the suspension arms and bulkheads. Installation is a snap. Sway bars reduce chassis lea
Jato is designed to be able to use sway bars. All the mounts and connectors are already integrated into the suspension arms and bulkheads. Installation is a snap. Sway bars reduce chassis lea
$18.95