uspension arm set, front (includes upper right & left and lower right & left arms)
Suspension arm set, front (includes upper right & left and lower right & left arms)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Summit™
Showingof 4293 item(s)
Yoke, brake (1)/ torque pins (2)/ 4x15mm screw pin
$4.00
Toe link, 5.0mm steel (front or rear) (2)
$10.00
Wheelie bar, assembled
The unique patented Traxxas adjustable wheelie bar features four position adjustment, now in 1/16 scale. The 1/16 E-Revo wheelie bar is intended for hard, high-traction surfaces where controlling wheelies can be difficult. The whee
The unique patented Traxxas adjustable wheelie bar features four position adjustment, now in 1/16 scale. The 1/16 E-Revo wheelie bar is intended for hard, high-traction surfaces where controlling wheelies can be difficult. The whee
$15.00
Covers, gear (3)
Replacement part for these models:
X-Maxx®
X-Maxx®X-Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 77086-4)
Replacement part for these models:
X-Maxx®
X-Maxx®X-Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 77086-4)
$4.00
Traxxas 7426X Battery hold-downs, tall (2) (allows for installation of taller, multi-cell batteries)
Battery hold-downs, tall (2) (allows for installation of taller, multi-cell batteries)
Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)
Replacement part for these models:
S
Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)
Replacement part for these models:
S
$6.50
Bumper, front/ bumper mount, front (black)
Bumper, front/ bumper mount, front (black)
Replacement part for these models:
Slash 2WD Unassembled Kit
Slash VXL
Slash
Bumper, front/ bumper mount, front (black)
Replacement part for these models:
Slash 2WD Unassembled Kit
Slash VXL
Slash
$10.00
Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1)
Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1)
Replacement part for these models:
Revo®
Slayer® Pro
Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1)
Replacement part for these models:
Revo®
Slayer® Pro
$11.00
Suspension arm, lower (right, front or rear) (1)
$10.00
Driveshaft, center, aluminum (blue-anodized)
Upgrade your 4-Tec 2.0 with this one-piece aluminum center driveshaft. Designed for the Velineon high-power brushless system, the anodized aluminum shaft runs perfectly straight and true for superior rigidity
Upgrade your 4-Tec 2.0 with this one-piece aluminum center driveshaft. Designed for the Velineon high-power brushless system, the anodized aluminum shaft runs perfectly straight and true for superior rigidity
$12.00
Bumper, rear
Rear bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-
Rear bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-
$6.00
LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness
$19.95
Bumper, front/ winch
Front bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronc
Front bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronc
$8.00
Nuts, 4mm nylon locking (10)
Nuts, 4mm nylon locking (10)
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
DCB M41 Widebody
Drag Slash
Ford® F-150 Raptor
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Jato
Nuts, 4mm nylon locking (10)
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
DCB M41 Widebody
Drag Slash
Ford® F-150 Raptor
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Jato
$2.00
E-clips/ C-rings
E-clips/ C-rings
Replacement part for these models:
Drag Slash
Ford® F-150 Raptor
Jato®
Nitro Rustler®
Nitro Slash
Revo®
Rustler® VXL
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slayer® Pro 4X4
Stampede® VXL
T-Maxx®
E-clips/ C-rings
Replacement part for these models:
Drag Slash
Ford® F-150 Raptor
Jato®
Nitro Rustler®
Nitro Slash
Revo®
Rustler® VXL
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slayer® Pro 4X4
Stampede® VXL
T-Maxx®
$2.00
Screws, 3x10mm countersunk machine (6) (hex drive)
Screws, 3x10mm countersunk machine (6) (hex drive)
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
E-Revo® VXL Brushless
Factory F
Screws, 3x10mm countersunk machine (6) (hex drive)
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
E-Revo® VXL Brushless
Factory F
$2.50
Camber link set (plastic / non-adjustable ) ( front & rear) (gray)
Camber link set (plastic / non-adjustable ) ( front & rear) (grey)
Replacement part for these models:
Rustler® 4X4
Rustler®
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4
St
Camber link set (plastic / non-adjustable ) ( front & rear) (grey)
Replacement part for these models:
Rustler® 4X4
Rustler®
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4
St
$3.00
Attachment screws, shock (3x12mm shoulder screws) (6)
Attachment screws, shock (3x12mm shoulder screws) (6)
Replacement part for these models:
Ford® Fiesta® ST Rally
Maxx®
Nitro Rustler®
Nitro Slash
Rustler® 4X4
Slash 4X4 VXL
Slash 4X4
Stampede®
Attachment screws, shock (3x12mm shoulder screws) (6)
Replacement part for these models:
Ford® Fiesta® ST Rally
Maxx®
Nitro Rustler®
Nitro Slash
Rustler® 4X4
Slash 4X4 VXL
Slash 4X4
Stampede®
$3.00
Main diff gear w/side cover plate & screws
$3.00
Wire harness, parallel battery connection (compatible with Traxxas® High Current Connector, NiMH only)
The Traxxas parallel Y-harness lets you combine two 7.2V NiMH batteries for extra-long run time in 1/16 scale vehicles. Dual-battery operation requires
The Traxxas parallel Y-harness lets you combine two 7.2V NiMH batteries for extra-long run time in 1/16 scale vehicles. Dual-battery operation requires
$8.00
Roll hoop, plastic/ transmission skid guard, plastic
$8.50
Half shafts, center front (Revo 3.3) (internal splined (1)/ external splined (1)/ center rear (internal splined (1)/ external splined (1)) (plastic parts only)
$4.25
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
$12.00