Driveshaft, center, aluminum (blue-anodized)
Upgrade your 4-Tec 2.0 with this one-piece aluminum center driveshaft. Designed for the Velineon high-power brushless system, the anodized aluminum shaft runs perfectly straight and true for superior rigidity
Showingof 4246 item(s)
Bumper, rear
Rear bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-
Rear bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-
$6.00
LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness
$19.95
Bumper, front/ winch
Front bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronc
Front bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronc
$8.00
Roll hoop, plastic/ transmission skid guard, plastic
$8.50
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.
Replacement part
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.
Replacement part
$7.50
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
Big Bore Shock piston head set features 2-hole piston heads (2), 3-hole piston heads (2), and shock mounting bushings & washers (2).
Big Bore Shock piston head set features 2-hole piston heads (2), 3-hole piston heads (2), and shock mounting bushings & washers (2).
$2.50
Hardware kit, stainless steel, Spartan/DCB M41 (contains all stainless steel hardware used on Spartan and DCB M41)
$16.00
Shock caps (2)/ shock bottoms (2)
Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Nitro Rustler®
Nitro Slash
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash
Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Nitro Rustler®
Nitro Slash
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash
$3.00
Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (2)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
$5.00
Connector, wiring harness (EZ-Start® and EZ-Start® 2)
Connector, wiring harness (EZ-Start and EZ-Start 2)
Replacement part for these models:
Revo®
Slayer® Pro 4X4
TRX® 2.5R
TRX® 3.3
Connector, wiring harness (EZ-Start and EZ-Start 2)
Replacement part for these models:
Revo®
Slayer® Pro 4X4
TRX® 2.5R
TRX® 3.3
$5.00
EZ-Start® system, complete
EZ-Start System, complete
Accessory part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
EZ-Start System, complete
Accessory part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
$39.99
Clutch bell (14-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust your truck's final drive ratio
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust your truck's final drive ratio
$12.00
Sway bar kit (front and rear) (includes sway bars and linkage)
Jato is designed to be able to use sway bars. All the mounts and connectors are already integrated into the suspension arms and bulkheads. Installation is a snap. Sway bars reduce chassis lea
Jato is designed to be able to use sway bars. All the mounts and connectors are already integrated into the suspension arms and bulkheads. Installation is a snap. Sway bars reduce chassis lea
$18.95
Caster blocks (c-hubs) (2)/ kingpin bushings (4)
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford® GT
Ford® Must
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford® GT
Ford® Must
$4.00
Spur gear, 39-tooth (32-pitch)
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more info
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more info
$3.00
Wheelie bar mount (1)(fits 1/10 scale Revo trucks)
$7.00
LED light set, complete with power supply (contains headlights, tail lights, roof light bar, rock lights & distribution block) (fits #8011 body)
The TRX-4® Defender LED Light Kit takes scale realism to the next level with working headlights, tail lights,
The TRX-4® Defender LED Light Kit takes scale realism to the next level with working headlights, tail lights,
$109.99
Spring, shock (red) (GTR) (3.8 rate gold) (1 pair)
$6.00