Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
Differential output yokes (Heavy-duty) (2)/ set screw yoke pins, M4/10 (2)
Replacement part for these models:
T-Maxx®
T-Maxx®T-Maxx®: TRX® 2.5 & TQ™ 2.4GHz Radio (Model# 49104-
Showingof 4246 item(s)
Rod ends, heavy duty (toe links) (8) (assembled with hollow balls)
$8.00
TRX® Pro.15 to TRX® 2.5/2.5R upgrade kit for Nitro Rustler®, Nitro Sport (incl. SE), and Nitro Stampede®
Traxxas makes it easy to upgrade TRX Pro .15 nitro-powered models to the awesome power of the new TRX 2.5 Racing Engine. All the necessary hardware t
Traxxas makes it easy to upgrade TRX Pro .15 nitro-powered models to the awesome power of the new TRX 2.5 Racing Engine. All the necessary hardware t
$25.00
Spool, differential (eliminates differential. Use off-road only) (requires #5379X ring gear)
This differential spool replaces the differential gears. The spool locks the axle, providing equal power to both wheels. For straight-line sand drags, rock cli
This differential spool replaces the differential gears. The spool locks the axle, providing equal power to both wheels. For straight-line sand drags, rock cli
$12.00
Traxxas 7426X Battery hold-downs, tall (2) (allows for installation of taller, multi-cell batteries)
Battery hold-downs, tall (2) (allows for installation of taller, multi-cell batteries)
Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)
Replacement part for these models:
S
Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)
Replacement part for these models:
S
$6.50
lutch bell (17-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust Slayer’s final drive ratio for
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust Slayer’s final drive ratio for
$12.00
Traxxas Suspension arm upper (1)/ suspension arm lower (1) (right rear) DISCONTINUED 5933
$7.50
Traxxas Suspension arm upper (1), suspension arm lower (1) (left rear) DISCONTINUED 5934
$7.50
Traxxas Spur gear adaptor/1.75mm metal hex spacer (for models w/o slipper clutch) 3693 DISCONTINUED
$2.99
Traxxas Driveshaft, steel constant-velocity (shaft only, 160mm) (1) (for use only with #7751, 7754, 7753, and/or 7753R) 7750 DISCONTINUED
$16.00
Traxxas 7727A Rear Upper Bulkhead (X-Maxx/X-Maxx Ultimate)
$20.00
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2)
$12.00
Driveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin
$14.00
Propeller shaft/ flex cable (heavy duty)
Replacement heavy duty flex propeller shaft
Replacement heavy duty flex propeller shaft
$25.00