Showingof 4246 item(s)
Traxxas 9798 Stake sides, utility trailer (complete set)/ spare tire mount (2)/ 3x18mm BCS (2)
$8.00
ECM-2.5 Electronic Control Module, waterproof (low voltage detection, fwd/rev/brake)
$49.95
Traxxas 9737-ORNG Steering blocks, brass (7 grams each) (left & right)/ 2.5x12mm BCS (with threadlock) (2)/ 2x6mm SS (with threadlock) (4)
$44.95
Ball bearings, blue rubber shield (5x8x2.5mm) (2)
$4.00
Trailer hitch (assembled)/ trailer coupler/ 3mm spring pre-load spacers (2)/ 2.5x8mm BCS (2)/ 1.6x10mm BCS (self-tapping) (1)
$7.00
SPUR GEAR 50-T .8 MP (32-P)
$3.00
Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch)
$3.00
Roll bar (assembled with LED light bar)/ mounts (front (2), rear (left & right))/ 2.6x12mm BCS (self-tapping) (4) (fits #9212 or 9230 series bodies)
$49.95
Roll bar (assembled with LED light bar)/ mounts (front (2), rear (left & right))/ 2.6x12mm BCS (self-tapping) (4) (fits #9212 or 9230 series bodies)
$49.95
Steering blocks (l&r)
Replacement left and right steering blocks
Replacement left and right steering blocks
$3.00
Servo horn (metal)
Eliminate flex and increase steering precision in your TRX-4M™ by adding this metal servo horn.
Accessory part for these models:
1/18 Ford® Bronco®
1/18 Land Rover® Defender®
Eliminate flex and increase steering precision in your TRX-4M™ by adding this metal servo horn.
Accessory part for these models:
1/18 Ford® Bronco®
1/18 Land Rover® Defender®
$6.00
Slipper pressure plate & hub (aluminum alloy)
$8.00
HEAT SINK TITAN 87T MOTOR RED
Heat sink, Titan® 87T motor (6061-T6 aluminum, red-anodized)
Heat sink, Titan® 87T motor (6061-T6 aluminum, red-anodized)
$10.00
Servo connector, Y adapter (for dual-servo steering)
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
Accessory part for these models:
Slayer® Pro 4X4
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
Accessory part for these models:
Slayer® Pro 4X4
$4.00
Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)
$6.00
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)
$8.00
Axle cover, brass (8 grams each) (2)/ 1.6x12mm CS (with threadlock) (8)
$29.95
Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch)
$3.00
Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)
$6.75