Showingof 4246 item(s)
Traxxas 1526 Drive gear (28-tooth) w/ set screw (1)
$3.00
Traxxas 1523 Battery holder with on/off switch/ rubber on/off switch cover
$4.00
Traxxas 1252 Nut set, lock nuts (3mm (11) and 4mm(7)) & washer set
$2.00
Traxxas 1242 Differential bevel gear set (3-small & 2-large side bevel gears)
$3.00
Traxxas 1221 Wheels, white (rear) (2) (Tom Cat)
$4.00
Spring, rear(black) (2)
Black standard springs fit XX-Long Ultra Shocks
Accessory part for these models:
Bandit® VXL
Bandit®
Black standard springs fit XX-Long Ultra Shocks
Accessory part for these models:
Bandit® VXL
Bandit®
$2.00
Traxxas 2423 Gear, 23-T pinion (48-pitch) (fits 3mm shaft)/ set screw
$3.00
Traxxas 2422 Gear, 22-T pinion (48-pitch) (fits 3mm shaft)/ set screw
$3.00
Steering blocks, left & right/ M4x0.7 NL (4)
$6.00
2200mAh 7.4v 2-Cell 25C LiPo iD® Battery
Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top speeds that Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer
Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top speeds that Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer
$41.95
Traxxas 8654G Wheel hubs, splined, 17mm (green-anodized) (4)/ 4x5 GS (4)/ 3x14mm pin (4)
$20.00
Control box (complete) (EZ-Start® 2)
Replacement starter control box for the EZ-Start® 2 starter.
Replacement part for these models:
Jato®
Nitro Rustler®
Nitro Slash
Revo®
Slayer® Pro 4X4
T-Maxx®
TRX® 2.5R
TRX® 3.3
Replacement starter control box for the EZ-Start® 2 starter.
Replacement part for these models:
Jato®
Nitro Rustler®
Nitro Slash
Revo®
Slayer® Pro 4X4
T-Maxx®
TRX® 2.5R
TRX® 3.3
$15.00
Suspension arms, left & right
Replacement left & right suspension arms
Replacement part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Rustler® VXL
Rustler®
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
St
Replacement left & right suspension arms
Replacement part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Rustler® VXL
Rustler®
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
St
$10.00
Traxxas 7796 Center drive, torque-biasing (assembled)/ 17x26x5 ball bearings (2) (requires #7727X bulkheads)
$65.00
PLATE, MOTOR
When upgrading your 1/16 scale vehicle to Velineon® brushless power, you will need to change the standard motor plate and mount. Use the 7090 motor plate and 7060 motor mount with the Velineon 380 brushless motor.
Replacement part for the
When upgrading your 1/16 scale vehicle to Velineon® brushless power, you will need to change the standard motor plate and mount. Use the 7090 motor plate and 7060 motor mount with the Velineon 380 brushless motor.
Replacement part for the
$5.00
Ball bearings, black rubber sealed (10x19x5mm) (2)
Pair of 10x19x5 mm black seal ball bearings. A step above blue sealed bearings, black sealed bearings offer an even tighter seal for ultimate protection in dirty environments.
Replacement part for these
Pair of 10x19x5 mm black seal ball bearings. A step above blue sealed bearings, black sealed bearings offer an even tighter seal for ultimate protection in dirty environments.
Replacement part for these
$8.00
Spur gear, 45-tooth (32-pitch)
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more info
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more info
$3.00
Shoulder screws, steering bellcranks (3x30mm cap-head machine) (2)/ draglink shoulder screws (chrome) (2)
Chrome drag link shoulder screws (2) with 3x30 mm cap-head bellcrank machine screws with hex-drive heads (2).
Replacement part for these models:
B
Chrome drag link shoulder screws (2) with 3x30 mm cap-head bellcrank machine screws with hex-drive heads (2).
Replacement part for these models:
B
$2.00