Contact us via phone for special order items, layaway options, or rush delivery!
1-772-213-9303
Showingof 4293 item(s)
Show:
Sort By:
Battery holder, 4-cell (no on/off switch) (for Jato and others that use a male Futaba style connector)
$4.00
This custom wiring harness simplifies the installation of a rechargeable receiver pack system in your Traxxas nitro model. It includes the on/off switch and a built-in charge jack, eliminating tedious splicing and soldering.
$5.00
Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
Differential output yokes (Heavy-duty) (2)/ set screw yoke pins, M4/10 (2)
Replacement part for these models:
T-Maxx®
T-Maxx®T-Maxx®: TRX® 2.5 & TQ™ 2.4GHz Radio (Model# 49104-
$5.00
Motor (EZ-Start®)
Motor (EZ-Start)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
$12.00
Clutch bell, (24-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear rat
$12.00
Output gear assembly, forward (26-T)
Output gear assembly, forward (26-T)
Replacement part for these models:
T-Maxx®
T-Maxx®T-Maxx®: TRX® 2.5 & TQ™ 2.4GHz Radio (Model# 49104-1)
$7.00
Friction pegs, slipper (12)
Friction pegs, slipper (12)
Replacement part for these models:
Nitro Rustler®
Nitro Slash
T-Maxx®
$4.50
Primary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)
Primary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)
Replacement part for these
$6.00
Gear, pinion (28-tooth) (48-pitch) (fits 3mm shaft)/ set screw
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult
$3.00
Spur gear (72-Tooth) (32-pitch) w/bushing
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual fo
$3.00
High-speed needle valve & seat assembly (w/ securing nut)
High-speed needle valve & seat assembly (w/ securing nut)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
$12.00
Hex wheel hubs (tall offset, 14x7.5mm) (2)/ axle pins (2.5x12mm) (2)
Hex wheel hubs (tall offset, 14x7.5mm) (2)/ axle pins (2.5x12mm) (2)
Replacement part for these models:
T-Maxx®
T-Maxx®T-Maxx®: TRX® 2.5 & TQ™ 2.4GHz Radio (Model# 49104-1)
$3.00
Output shaft (1)/ output shaft spacer (5x8x14mm)
Output shaft (1)/ output shaft spacer (5x8x14mm)
Replacement part for these models:
T-Maxx®
T-Maxx®T-Maxx®: TRX® 2.5 & TQ™ 2.4GHz Radio (Model# 49104-1)
$7.00
Shock tower, rear
Shock tower, rear
Replacement part for these models:
Nitro Rustler®
Nitro Rustler®Nitro Rustler®: TRX® 2.5, TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 44096-3)
Nitro Slash
Nitro SlashNitro Slash: TRX® 3.3, TQi™ Traxxas
$4.00
Bulkheads (l & r) (front) (gray)
Bulkheads (L&R) (front) (grey)
Replacement part for these models:
T-Maxx®
T-Maxx®T-Maxx®: TRX® 2.5 & TQ™ 2.4GHz Radio (Model# 49104-1)
T-Maxx®T-Maxx®: TRX® 3.3, TQi™ 2.4GHz Radio System, Traxxas Link™ Wireless Module,
$8.00
Ultra Shocks (gray) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. The complete rear set features two pre-assembled gray shock bodies (
$18.00
Connector, wiring harness (EZ-Start® and EZ-Start® 2)
Connector, wiring harness (EZ-Start and EZ-Start 2)
Replacement part for these models:
Nitro Rustler®
Nitro Slash
T-Maxx®
TRX® 2.5R
TRX® 3.3
TRX® Pro .15
$5.00
Idler gear (20-tooth)/ idler gear shaft
Idler gear (20-tooth)/ idler gear shaft
Replacement part for these models:
Nitro Rustler®
Nitro Rustler®Nitro Rustler®: TRX® 2.5, TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 44096-3)
$3.50
Pressure rings, slipper (notched) (2)
Pressure rings, slipper (notched) (2)
Replacement part for these models:
Nitro Rustler®
Nitro Rustler®Nitro Rustler®: TRX® 2.5, TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 44096-3)
Nitro Slash
Nitro S
$2.50
Rocker arm set, progressive-2/ plastic bushings (8)
Progressive rate rocker arms determine how much the compressive force at the wheel will vary with suspension travel. The higher the rate, the more the suspension will stiffen as the wheel moves upward.
$5.00
Yokes, differential and transmission (2)/ 3x10mm screw pin (2)
Yokes, differential and transmission (2)/ 3x10mm screw pin (2)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
$3.00
Ball bearings, blue rubber sealed (8x12x3.5mm) (2)
Ball bearings, blue rubber sealed (8x12x3.5mm) (2)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
Maxx®
Unlimited Desert Racer®
$4.00
Showingof 4293 item(s)