Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)
Replacement part for these models:
X-Maxx®
Showingof 4246 item(s)
Spur gear, 50-tooth
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on
$3.00
Input gear, transmission, 20-tooth/ 2.5x12mm pin
Replacement part for these models:
X-Maxx®
Replacement part for these models:
X-Maxx®
$4.00
Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)
$38.00
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
Extreme heavy-duty steel CV (constant velocity) driveshafts are engineered to satisfy the performance and durability needs of the most demanding drivers. Designed specifically for
Extreme heavy-duty steel CV (constant velocity) driveshafts are engineered to satisfy the performance and durability needs of the most demanding drivers. Designed specifically for
$79.95
Camber link set for Bandit® (plastic/ non-adjustable)
Non-adjustable black composite camber link set includes front and rear links
Accessory part for these models:
Bandit®
Non-adjustable black composite camber link set includes front and rear links
Accessory part for these models:
Bandit®
$3.00
Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
11-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-
11-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-
$4.00
Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
Replacement left and right 55 mm steel toe links (75 mm center to center). Adjustable steel turnbuckles allow you to dial in the perfect toe settings. Come
Replacement left and right 55 mm steel toe links (75 mm center to center). Adjustable steel turnbuckles allow you to dial in the perfect toe settings. Come
$8.00
Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)
Upgrade your standard rear camber links with these left and right 36 mm adjustable steel turnbuckles (56 mm center to center). Stee
Upgrade your standard rear camber links with these left and right 36 mm adjustable steel turnbuckles (56 mm center to center). Stee
$7.00
Head protector, cooling head (1)/3x6mm CCS (5) (TRX® 3.3)
Cooling head protector for TRX® 3.3 engine.
Replacement part for these models:
Jato®
Nitro Slash
Revo®
Slayer® Pro 4X4
T-Maxx®
TRX® 3.3
Cooling head protector for TRX® 3.3 engine.
Replacement part for these models:
Jato®
Nitro Slash
Revo®
Slayer® Pro 4X4
T-Maxx®
TRX® 3.3
$3.00
Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Designed for extreme performance applications, the rear extreme heavy-duty U-joint driveshaft adds extra material to critical areas for e
Designed for extreme performance applications, the rear extreme heavy-duty U-joint driveshaft adds extra material to critical areas for e
$12.00
Shocks, GTR aluminum (assembled) (2) (without springs)
Aluminum GTR shocks provide the ultimate in damping performance and control. A machined, threaded aluminum body with spring collar allows easy and precise preload adjustments. Vented spring perches h
Aluminum GTR shocks provide the ultimate in damping performance and control. A machined, threaded aluminum body with spring collar allows easy and precise preload adjustments. Vented spring perches h
$29.95
Tires and wheels, assembled, glued (split-spoke black chrome wheels, 1.9" Response tires) (front) (2)
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
Ford® GT
Ford® Mustang GT
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
Ford® GT
Ford® Mustang GT
$19.95
Nuts, 5mm flanged nylon locking (aluminum, blue-anodized, serrated) (4)
Lightweight and great looking, these anodized aluminum flange lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking washer keep them snug
Lightweight and great looking, these anodized aluminum flange lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking washer keep them snug
$10.00
OVERVIEWTQi 2.4 GHz High Output radio system, 2-channel, Traxxas Link™ enabled, TSM (2-ch transmitter, 5-ch micro receiver) LogoOVERVIEW
DETAILS
FEATURES
VIDEO
GALLERY
SUPPORT
TQi 2.4GHz (2-Channel) Intelligent Radio System
With Traxxas Stability M
DETAILS
FEATURES
VIDEO
GALLERY
SUPPORT
TQi 2.4GHz (2-Channel) Intelligent Radio System
With Traxxas Stability M
$99.95
OVERVIEWOVERVIEW
DETAILS
TRAXXAS LINK APP
FEATURES
VIDEO
GALLERY
SUPPORT
TQi 2.4GHz (4-Channel) Intelligent Radio System
Compatible with Traxxas Stability Management Receiver
Traxxas Link Wireless Module Pairs TQi with Android 4.4+ or Appl
DETAILS
TRAXXAS LINK APP
FEATURES
VIDEO
GALLERY
SUPPORT
TQi 2.4GHz (4-Channel) Intelligent Radio System
Compatible with Traxxas Stability Management Receiver
Traxxas Link Wireless Module Pairs TQi with Android 4.4+ or Appl
$149.99
MIP8106
C-CVD Kit for Slash/Nitro Rustler and Stampede
C-CVD Kit for Slash/Nitro Rustler and Stampede
$47.24
MIP18140
X-Duty CVD Drive Kit, Rear, 87mm to 112mm w/ 10mm x 5mm Bearing, for Traxxas Slash/Rally/Stampede
X-Duty CVD Drive Kit, Rear, 87mm to 112mm w/ 10mm x 5mm Bearing, for Traxxas Slash/Rally/Stampede
$75.60
HRAXMX10X06
Aluminum 24mm Hex Hub Wheel Lock Set for Traxxas X-Maxx
Aluminum 24mm Hex Hub Wheel Lock Set for Traxxas X-Maxx
$68.88
HRAXMX288CE
Steel HD CV Drive Shafts Axles w/ Aluminum Hex, for Traxxas X-Maxx
Hot Racing's steel CV axle drive shafts with 24mm aluminum wheel hex hubs for the Traxxas X-Maxx 6S and 8S.
Features:
CNC machined hardened steel construction, with t
Steel HD CV Drive Shafts Axles w/ Aluminum Hex, for Traxxas X-Maxx
Hot Racing's steel CV axle drive shafts with 24mm aluminum wheel hex hubs for the Traxxas X-Maxx 6S and 8S.
Features:
CNC machined hardened steel construction, with t
$65.88
Push rods, aluminum (blue-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)
Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and anodized with a brilliant finish.
Accessory part for these mode
Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and anodized with a brilliant finish.
Accessory part for these mode
$24.00
Push rods, aluminum (green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)
Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and anodized with a brilliant finish.
Accessory part for these mod
Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and anodized with a brilliant finish.
Accessory part for these mod
$24.00
Bulkhead (front) (gray)
Gray front bulkhead
Replacement part for these models:
Bandit® VXL
Bandit®
Nitro Rustler®
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Stampede® VXL
Stampede®
Accessory part for these mo
Gray front bulkhead
Replacement part for these models:
Bandit® VXL
Bandit®
Nitro Rustler®
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Stampede® VXL
Stampede®
Accessory part for these mo
$6.00
EXO1939
2WD Slash Slipper Eliminator Spur Mount, for 2wd Slash Spurs
Features:
Heavy duty yet light weight slipper eliminator spur gear mounting hub for all 1/10 Traxxas 2wd Slash and Bandit buggies and trucks.
Only weighing 3gr, this mount delete
2WD Slash Slipper Eliminator Spur Mount, for 2wd Slash Spurs
Features:
Heavy duty yet light weight slipper eliminator spur gear mounting hub for all 1/10 Traxxas 2wd Slash and Bandit buggies and trucks.
Only weighing 3gr, this mount delete
$14.95