Showingof 4246 item(s)
Wheelie bar mounts/ rear skidplate (black)
$6.00
Slipper pressure plate and hub (alloy)
Heavy-duty pressure plate and hub for the 5352X or 5352R slipper clutch rebuild kits. Does not fit #5552X standard-duty clutch rebuild kit.
Heavy-duty pressure plate and hub for the 5352X or 5352R slipper clutch rebuild kits. Does not fit #5552X standard-duty clutch rebuild kit.
$8.00
Spool, differential (eliminates differential. Use off-road only) (Requires #5379 ring gear)
$12.00
Starter, recoil (complete with screws) (TRX® 2.5)
Replace the electric EZ-Start® system on your TRX® 2.5 or 3.3 engines with the recoil pull starter for racing applications where weight savings are critical. It includes a heavy-duty spring and cord for l
Replace the electric EZ-Start® system on your TRX® 2.5 or 3.3 engines with the recoil pull starter for racing applications where weight savings are critical. It includes a heavy-duty spring and cord for l
$20.00
Bulkhead tie bar, upper (1)/ lower (2) (steel)
$10.00
Turnbuckles, aluminum (red-anodized), camber links, 32mm (front) (2)/ camber links, 28mm (rear) (2)/ toe links, 34mm (2)/ aluminum wrench
$39.95
Traxxas 3372 Rebuild kit, Velineon® 380 (4x9x4mm ball bearings (2), 2x6mm CCS (with threadlock) (2), front shims (2))
$10.00
Wheelie bar mount (heavy duty)
Replacement heavy-duty wheelie bar mount for the 9460-series extended wheelie bar
Replacement heavy-duty wheelie bar mount for the 9460-series extended wheelie bar
$5.00
Traxxas 4982 Diff gear set: 13-T output gear shafts (2)/ 13-T spider gears (2)/ spider shaft (1)/ 6x10x0.5mm PTFE-coated washer (1)
$9.00
Wheels, wheelie bar, 6061-T6 aluminum (gray-anodized) (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW (2)
$19.95
Tuned pipe, Resonator®, R.O.A.R. legal, blue-anodized (aluminum, single chamber)
$39.95
Traxxas 7829G Suspension arms, green, upper (left or right, front or rear), heavy duty (2)
$10.00
Traxxas 9051 Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit)
$14.00
Traxxas 8990 LED light kit, Maxx®, complete (includes #6590 high-voltage power amplifier)
$99.95
Springs, front (white) (progressive rate) (2)
Part 6857 UPC 020334685704
Part 6857 UPC 020334685704
$5.00
Traxxas 8963T Shock shaft, 72mm (GT-Maxx®) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)
$25.00
Traxxas 8952A Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (2)
$55.00
Axle shaft, front, heavy duty (left & right)/ portal drive input gear, front (machined) (2) (assembled)
Left and right heavy-duty front axles are machined from high-grade 4340 Chromoly steel for maximum strength and durability. Driveshafts come assembled
Left and right heavy-duty front axles are machined from high-grade 4340 Chromoly steel for maximum strength and durability. Driveshafts come assembled
$59.95
Traxxas 7236A Bumper, front (1), rear (1)/ bumper support, front (1), rear (1) (green)
$6.50
Caster blocks (c-hubs), left & right
Replacement part for these models:
X-Maxx®
X-Maxx®X-Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 77086-4)
Replacement part for these models:
X-Maxx®
X-Maxx®X-Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 77086-4)
$6.00