TRX® Pro.15 to TRX® 2.5/2.5R upgrade kit for Nitro Rustler®, Nitro Sport (incl. SE), and Nitro Stampede®
Traxxas makes it easy to upgrade TRX Pro .15 nitro-powered models to the awesome power of the new TRX 2.5 Racing Engine. All the necessary hardware t
Showingof 9914 item(s)
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum
Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum
$69.95
Motor mount, 6061-T6 aluminum (blue-anodized)
The Traxxas aluminum motor mount is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power brushless applications.
Accessory part for these models:
Ford® Fiest
The Traxxas aluminum motor mount is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power brushless applications.
Accessory part for these models:
Ford® Fiest
$36.95
GALLERY
SUPPORT
Velineon 3500 Brushless Motor
Velineon 3500 Brushless Motor (#3351R) Cut-Away View (right)
The Velineon® 3500 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor
SUPPORT
Velineon 3500 Brushless Motor
Velineon 3500 Brushless Motor (#3351R) Cut-Away View (right)
The Velineon® 3500 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor
$89.95
9473X TRAXXAS Wheels, weld black chrome (rear) (2)
$18.00
Servo horn, steering/ linkage, steering (3x30 threaded rod)/ rod ends (2)/ hollow balls (2)
Servo horn, steering/ linkage, steering (3x30 threaded rod)/ rod ends (2)/ hollow balls (2)
Replacement part for these models:
Jato®
Jato®Jato®: TRX® 3.3, TQi™
Servo horn, steering/ linkage, steering (3x30 threaded rod)/ rod ends (2)/ hollow balls (2)
Replacement part for these models:
Jato®
Jato®Jato®: TRX® 3.3, TQi™
$4.00
Oil, differential (30K wt, 50cc)
Traxxas performance diff lubes make it easy to increase or decrease the limited slip action of the gear differential. Depending on the track conditions, altering the limited slip capability can enhance turning performance
Traxxas performance diff lubes make it easy to increase or decrease the limited slip action of the gear differential. Depending on the track conditions, altering the limited slip capability can enhance turning performance
$7.50
Spring, shock (red) (GTR) (3.2 rate orange) (1 pair)
Traxxas offers a wide variety of spring rates for the GTR shocks to compensate for lighter or heavier truck configurations. The springs use high-quality spring steel with durable powder-coated finishes
Traxxas offers a wide variety of spring rates for the GTR shocks to compensate for lighter or heavier truck configurations. The springs use high-quality spring steel with durable powder-coated finishes
$6.00
U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)
U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)
Replaceme
U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)
Replaceme
$10.00
Traxxas 5385 Gear set, 2-speed standard ratio (2nd speed gear 39T, 13T-17T input gears, hardware)
$7.50
Mount, telemetry expander (fits 4-Tec® 2.0 & 3.0)
Use this expander mount to secure your Telemetry Expander module to the top of your 4-Tec's gear cover.
Accessory part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Co
Use this expander mount to secure your Telemetry Expander module to the top of your 4-Tec's gear cover.
Accessory part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Co
$4.00
Mirrors, side, black (left & right)/ retainers (2)/ body clips (4) (fits #8010 body)
Black side mirrors for the 1979 Bronco body. Includes hardware.
Replacement part for these models:
TRX-4® 1979 Ford® Bronco
Accessory part for these models:
TRX-4® 1
Black side mirrors for the 1979 Bronco body. Includes hardware.
Replacement part for these models:
TRX-4® 1979 Ford® Bronco
Accessory part for these models:
TRX-4® 1
$5.50
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Replacement part for these models:
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Replacement part for these models:
$10.00
Yoke, brake (1)/ torque pins (2)/ 4x15mm screw pin
$4.00
Bumper, front/ bumper mount, front (black)
Bumper, front/ bumper mount, front (black)
Replacement part for these models:
Slash 2WD Unassembled Kit
Slash VXL
Slash
Bumper, front/ bumper mount, front (black)
Replacement part for these models:
Slash 2WD Unassembled Kit
Slash VXL
Slash
$10.00
Bumper, rear
Rear bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-
Rear bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-
$6.00
Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
The heavy-duty clutch rebuild kit refreshes the heavy-duty slipper clutch with new steel disc, friction pads, and hardware. (Fits #
The heavy-duty clutch rebuild kit refreshes the heavy-duty slipper clutch with new steel disc, friction pads, and hardware. (Fits #
$7.50
Roll hoop, plastic/ transmission skid guard, plastic
$8.50
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.
Replacement part
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.
Replacement part
$7.50
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
Big Bore Shock piston head set features 2-hole piston heads (2), 3-hole piston heads (2), and shock mounting bushings & washers (2).
Big Bore Shock piston head set features 2-hole piston heads (2), 3-hole piston heads (2), and shock mounting bushings & washers (2).
$2.50
Shock caps (2)/ shock bottoms (2)
Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Nitro Rustler®
Nitro Slash
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash
Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks
Replacement part for these models:
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Nitro Rustler®
Nitro Slash
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 VXL
Slash
$3.00
