Showingof 9914 item(s)
Traxxas 4262T Shock shafts, hardened steel, titanium nitride coated (32mm) (2)
$10.00
Traxxas 4261T Shock shafts, hardened steel, titanium nitride coated (29mm) (front) (2)
$10.00
Traxxas 4147X Nuts, 5mm flanged nylon locking (aluminum, blue-anodized) (4)
$6.00
Traxxas 4142X Flywheel, (larger, knurled for use with starter boxes) (TRX® 2.5 and TRX® 2.5R) (silver anodized)
$10.00
Plate, motor (for single motor installation, use gear cover #3977X)
$10.00
Traxxas 3996X Idler gear, 20-tooth/ idler gear shaft
$5.50
Traxxas 3994X Shaft, lightweight output / idler gear shafts (2) (hard-anodized/ PTFE-coated aluminum)
$12.00
Traxxas 3991X Gearbox halves (front & rear)/ shift detent ball/ spring/ 4mm GS/ shift shaft seal, glued/ 2.5x8mm CS (2)
$10.00
Traxxas 3985X Output gears, 33T (2)/ drive dog carrier/ output shaft spacer
$6.00
Traxxas 3977R Cover, gear (upper & lower) (1)/ dust plug (1)/ 3x6mm CS (3) (for single motor installation, use with motor plate #3997X)
$4.50
Traxxas 8683 Output gears, differential, hardened steel (2)
$25.00
Traxxas 8682 Gear set, differential (spider gears (4), spider gear shaft (2))®
$10.00
Traxxas 8680 Differential gasket/ x-rings (2)/ 12.2x18x0.5 metal washer (1)/ 12.2x18x0.5 PTFE-coated washer (1)
$4.00
Traxxas 8671 Wheels, 3.8' (black) (2) (17mm splined)
$10.00
Traxxas 8661 Motor mount hinge post/ fixed gear adapter/ 5x25mm BCS (1)/ 4x16mm CS with split and flat washer (1)
$3.00
Traxxas 8652 Drive cup, machined steel (2)/ 4x17mm screw pins (2)
$18.00
Skid plate set, front/ skid plate, rear/ 3x10 BCS (6)/ 3x30 BCS (1) (fits #8629 & 8630 bulkheads)
$8.00
Axle carriers, left & right (1 each) (use with 8x16mm & 17x26mm ball bearings)/ dust boot retainers
$10.00