lutch bell (17-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust Slayer’s final drive ratio for
Showingof 9914 item(s)
Sway bar kit (front and rear) (includes sway bars and linkage)
Jato is designed to be able to use sway bars. All the mounts and connectors are already integrated into the suspension arms and bulkheads. Installation is a snap. Sway bars reduce chassis lea
Jato is designed to be able to use sway bars. All the mounts and connectors are already integrated into the suspension arms and bulkheads. Installation is a snap. Sway bars reduce chassis lea
$18.95
Spur gear, 39-tooth (32-pitch)
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more info
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more info
$3.00
Wheelie bar mount (1)(fits 1/10 scale Revo trucks)
$7.00
LED light set, complete with power supply (contains headlights, tail lights, roof light bar, rock lights & distribution block) (fits #8011 body)
The TRX-4® Defender LED Light Kit takes scale realism to the next level with working headlights, tail lights,
The TRX-4® Defender LED Light Kit takes scale realism to the next level with working headlights, tail lights,
$109.99
Spring, shock (red) (GTR) (3.8 rate gold) (1 pair)
$6.00
Phone mount, transmitter (fits TQi and Aton® transmitters)
$15.00
O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7.8x.6mm crush washer (2)/ carburetor dust boot (1) (TRX2.5, 2.5R)
$4.00
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)
$10.00
Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)
$18.00
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
$3.00
Half shafts, center (internal splined (3)/ external splined (2)) (plastic parts only)
$6.00
Linkage, shift, Revo® (includes: ball collar, spring, ball cup, servo horn, linkage wire)
$3.50
Spring, shock (red) (GTR) (4.4 rate black) (1 pair)
$6.00
Servo horn (with built-in spring and hardware)
$3.50
Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tools
$4.00
Shocks, GTR composite (assembled, without springs) (2)
Shocks, GTR composite (assembled, without springs) (2)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
TRX-4® Equipped with Traxx®
TRX-4® Traxx® Al
Shocks, GTR composite (assembled, without springs) (2)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
TRX-4® Equipped with Traxx®
TRX-4® Traxx® Al
$16.00
LED light bar (Rigid®), TRX-4 (requires #8028 power supply)
The Rigid® LED light bar kit adds more candlepower to your TRX-4® Defender®. Requires #8028 power supply.The light bar also comes standard in the complete Defender Light Kit (#8095).
Accessory
The Rigid® LED light bar kit adds more candlepower to your TRX-4® Defender®. Requires #8028 power supply.The light bar also comes standard in the complete Defender Light Kit (#8095).
Accessory
$30.00
PTK7100
3.5" 1/8 Exhaust Manifold Spring (2) (Long)
This is a set of two ProTek R/C Long Exhaust Manifold Springs, and are intended for use with 1/8 Scale Nitro Engines. The Exhaust Manifold Springs attach the tuned pipe manifold to the engine exhaust
3.5" 1/8 Exhaust Manifold Spring (2) (Long)
This is a set of two ProTek R/C Long Exhaust Manifold Springs, and are intended for use with 1/8 Scale Nitro Engines. The Exhaust Manifold Springs attach the tuned pipe manifold to the engine exhaust
$3.59
Transmission Pins and Diff Pins: All ECX 1/10 2WD
$5.99