Differential, front, complete (fits X-Maxx® 8s)
The Pro Built front differential comes completely assembled and ready to install in your X-Maxx. Includes bearings.
Accessory part for these models:
X-Maxx®
STUDIO
Complete Front Differential (#7880)
Showingof 4246 item(s)
Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
17-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can
17-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can
$4.00
Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)
54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear
54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear
$18.00
Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shaft (2)/ output shaft (2)/ 2.5X13.8 pin (2))
Replacement part for these models:
Maxx®
Replacement part for these models:
Maxx®
$18.00
Servo connector, Y adapter (for dual-servo steering)
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
Accessory part for these models:
Slayer® Pro 4X4
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
Accessory part for these models:
Slayer® Pro 4X4
$4.00
Steering bellcranks (L&R)/ draglink
Left and right steering bellcranks with drag link
Replacement part for these models:
Bandit® VXL
Bandit®
Ford® F-150 Raptor
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Accesso
Left and right steering bellcranks with drag link
Replacement part for these models:
Bandit® VXL
Bandit®
Ford® F-150 Raptor
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Accesso
$4.00
Input shaft (slipper shaft) / spring pin
Replacement input shaft (slipper clutch shaft) for Magnum 272 transmissions. Does not fit Magnum 272R transmissions
Replacement part for these models:
Bandit® VXL
Replacement input shaft (slipper clutch shaft) for Magnum 272 transmissions. Does not fit Magnum 272R transmissions
Replacement part for these models:
Bandit® VXL
$3.00
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings.
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Off
Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings.
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Off
$2.00
Ball bearings, blue rubber sealed (5x11x4mm) (2)
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 A
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 A
$3.50
Screws, set (grub) 4mm (6) (with threadlock)
Set of six 4 mm set screws (grub screws) with threadlock
Replacement part for these models:
E-Revo® VXL Brushless
Jato®
Nitro Slash
Revo®
Slayer® Pro 4X4
Summit
T-Maxx®
TRX® 2.5R
TRX® 3.3
Set of six 4 mm set screws (grub screws) with threadlock
Replacement part for these models:
E-Revo® VXL Brushless
Jato®
Nitro Slash
Revo®
Slayer® Pro 4X4
Summit
T-Maxx®
TRX® 2.5R
TRX® 3.3
$3.00
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
The Traxxas heavy-duty driveshaft comes pre-assembled and ready to install. It's a step up from standard driveshafts with improved performance an
The Traxxas heavy-duty driveshaft comes pre-assembled and ready to install. It's a step up from standard driveshafts with improved performance an
$10.00
Suspension arms, long (rear)
Replacement left and right rear suspension arms
Replacement part for these models:
Bandit® VXL
Bandit®
Replacement left and right rear suspension arms
Replacement part for these models:
Bandit® VXL
Bandit®
$8.00
Spur gear, 54-tooth, steel (1.0 metric pitch)
54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help bala
54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help bala
$18.00
Upper chassis (black)
Replacement black upper chassis
Accessory part for these models:
Bandit® VXL
Bandit®
Rustler® VXL
Rustler®
Replacement black upper chassis
Accessory part for these models:
Bandit® VXL
Bandit®
Rustler® VXL
Rustler®
$5.00
Planetary gear differential with steel ring gear (complete) (fits Bandit®, Stampede®, Rustler®)
Complete planetary gear differential (unassembled) for Magnum 272™ transmissions. Includes metal ring gear, hardened-steel internal gears, gear shafts, and sc
Complete planetary gear differential (unassembled) for Magnum 272™ transmissions. Includes metal ring gear, hardened-steel internal gears, gear shafts, and sc
$15.00
HRAXMX54A01
Adjustable Aluminum Upper Arm for Traxxas X-Maxx
This is a special order item and is subject to manufacturer availability.
Please allow a minimum of 2 weeks for delivery.
No returns or cancellations allowed.
Adjustable Aluminum Upper Arm for Traxxas X-Maxx
This is a special order item and is subject to manufacturer availability.
Please allow a minimum of 2 weeks for delivery.
No returns or cancellations allowed.
$73.88
MIP18150
X-Duty CVD Drive Kit, Front, 87mm to 112mm, w/10mm x 5mm Bearing, for Traxxas Stampede/ Slash
X-Duty CVD Drive Kit, Front, 87mm to 112mm, w/10mm x 5mm Bearing, for Traxxas Stampede/ Slash
$81.99
DragRace Concepts Traxxas Aluminum Top Shaft
$15.00
DragRace Concepts Drag Pak Maxim Aluminum Top Shaft Gear (22T)
$12.00
ig block Installation kit (engine mount and required hardware)
The big block installation kit makes it easy to bolt big block engine torque into your Traxxas truck. The kit includes all the components and hardware necessary for a factory engineered, qual
The big block installation kit makes it easy to bolt big block engine torque into your Traxxas truck. The kit includes all the components and hardware necessary for a factory engineered, qual
$55.00
Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 2-channel (transmitter only)
Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 2-channel (transmitter only)
Replacement part for these models:
1/16 E-Revo® VXL
4-Tec® 2.0 VXL AWD Cha
Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 2-channel (transmitter only)
Replacement part for these models:
1/16 E-Revo® VXL
4-Tec® 2.0 VXL AWD Cha
$69.95