Showingof 4246 item(s)
Traxxas 1234 Diff gear side plates/ ball joint plate
$2.00
Traxxas 1226 Nerf bar stays & wheel hubs (l&r for Tom Cat)
$2.50
Traxxas 2477 Wheelie bar mount/ 3x40 BCS (1)/ 3x30 BCS (1)/ 3x12 BCS (1) (for LED light kit installation)
$6.00
Traxxas 2473 Wheels, Tracer 2.2' (chrome) (2) (Bandit® front)
$7.50
Traxxas 2472 Wheels, Tracer 2.2' (chrome) (2) (Bandit® rear)
$8.00
Springs, front (black) (2)
Black standard springs fit XX-Long Ultra Shocks
Accessory part for these models:
Bandit® VXL
Bandit®
Drag Slash
Ford® F-150 Raptor
Nitro Rustler®
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Black standard springs fit XX-Long Ultra Shocks
Accessory part for these models:
Bandit® VXL
Bandit®
Drag Slash
Ford® F-150 Raptor
Nitro Rustler®
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
$2.00
Traxxas 2435 Gear, 35-T pinion (48-pitch) (fits 3mm shaft)/ set screw
$3.00
Traxxas 2431 Gear, 31-T pinion (48-pitch) (fits 3mm shaft)/ set screw
$3.00
Traxxas 2424 Gear, 24-T pinion (48-pitch) (fits 3mm shaft)/ set screw
$3.00
Traxxas 5031 Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
$6.99
Wheel hubs, splined, 17mm (red-anodized) (4)/ 4x5 GS (4)/ 3x14mm pin (4)
17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsu
17 mm red-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsu
$19.95
Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4)
Big Bore shocks provide optimal bump and jump control for your Traxxas model. Hard-anodized aluminum bodies, PTFE-coated shock bores, and
Big Bore shocks provide optimal bump and jump control for your Traxxas model. Hard-anodized aluminum bodies, PTFE-coated shock bores, and
$59.95
Driveshaft, center, front (steel)/ 2.5x12 screw pin
Upgrade your Unlimited Desert Racer’s® driveline with this steel center driveshaft. Large drive pins are press-fit into the axle for extra security and move smoothly through the tough steel drive cups f
Upgrade your Unlimited Desert Racer’s® driveline with this steel center driveshaft. Large drive pins are press-fit into the axle for extra security and move smoothly through the tough steel drive cups f
$20.00
Bottle, fuel filler (500cc)
The fuel bottle holds 500cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and o-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are not meant for long-te
The fuel bottle holds 500cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and o-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are not meant for long-te
$8.00
Body mounts & posts, front & rear (complete set)
Front and rear body posts and mounts. Includes screws.
Replacement part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® Equipped with Traxx®
TRX-4® Scale and Trail™ Cra
Front and rear body posts and mounts. Includes screws.
Replacement part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® Equipped with Traxx®
TRX-4® Scale and Trail™ Cra
$8.00
Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for #9550 front or #9654X rear steel CV driveshafts)
Replacement part for these models:
Sledge™
Replacement part for these models:
Sledge™
$5.00
Suspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
Replace the stock screw pins with these heavy-duty steel suspension pins that are stronger, fit more precisely, and pivot with less friction. These are required hardware for
Replace the stock screw pins with these heavy-duty steel suspension pins that are stronger, fit more precisely, and pivot with less friction. These are required hardware for
$2.50
Input shaft, transmission (cush drive)
Replacement part for these models:
X-Maxx®
Replacement part for these models:
X-Maxx®
$6.00
Housing, cush drive (front & rear halves)
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
X-Maxx®
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
X-Maxx®
$3.00
Output gear, 51-tooth, metal (requires #7785X input gear)
Steel 51-tooth output gear for X-Maxx. Requires #7785X steel input gear.
Replacement part for these models:
X-Maxx®
Steel 51-tooth output gear for X-Maxx. Requires #7785X steel input gear.
Replacement part for these models:
X-Maxx®
$12.00