ProTek RC XH Multi-Adapter Balance Board (2S-6S) (ProTek, Align, E-Flite) w/CableOVERVIEW REVIEWS
This is the ProTek R/C Multi-Adapter Balance Board for the ProTek R/C Prodigy 6S, Hyperion 6S or any other 6S Balance Charger that uses XH compatible balanc
Showingof 1508 item(s)
ProTek RC "Glitch Buster" Receiver Voltage Stabilizer
$4.89
ProTek RC 20cm "XH" Multi-Adapter Balance Cable (6S Charger To 6S Balance Board)
$3.99
PTK-5034 ProTek RC 3.5mm "Super Bullet" Gold Connectors (4 Female)
$4.79
Duratrax Motor Connector Set Brushed Motor 16 Ga Wire 2 Male 2 Female DTXC8263
$4.99
Battery hold-down plate (grey) / metal posts (2) / body clips (2)
$3.00
This custom wiring harness simplifies the installation of a rechargeable receiver pack system in your Traxxas nitro model. It includes the on/off switch and a built-in charge jack, eliminating tedious splicing and soldering.
$5.00
Connector, wiring harness (EZ-Start® and EZ-Start® 2)
Connector, wiring harness (EZ-Start and EZ-Start 2)
Replacement part for these models:
Nitro Rustler®
Nitro Slash
T-Maxx®
TRX® 2.5R
TRX® 3.3
TRX® Pro .15
Connector, wiring harness (EZ-Start and EZ-Start 2)
Replacement part for these models:
Nitro Rustler®
Nitro Slash
T-Maxx®
TRX® 2.5R
TRX® 3.3
TRX® Pro .15
$5.00
Waterproof Digital Servo
• 125 oz-in torque
• Transit time 0.17 sec/60°
• 125 oz-in torque
• Transit time 0.17 sec/60°
$39.95
Box, control
Box, control
Replacement part for these models:
TRX® 2.5R
TRX® 2.5RTRX® 2.5R (Model# 5207R)
TRX® 3.3
TRX® 3.3TRX® 3.3 (Model# 5407)
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
Box, control
Replacement part for these models:
TRX® 2.5R
TRX® 2.5RTRX® 2.5R (Model# 5207R)
TRX® 3.3
TRX® 3.3TRX® 3.3 (Model# 5407)
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
$12.50
Castle Creations BEC 2.0 Waterproof BEC Voltage Regulator (15 Amp)OVERVIEW REVIEWS RESOURCES
The Castle Creations CC BEC 2.0 WP was developed for racers, crawlers, and hard core bashers with an integrated 15 amp peak power regulator in a CNC machined, wa
The Castle Creations CC BEC 2.0 WP was developed for racers, crawlers, and hard core bashers with an integrated 15 amp peak power regulator in a CNC machined, wa
$60.99
Smart G2 Powerstage Bundle for Surface 3S
$115.00
LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness
$19.95
Wire harness, parallel battery connection (compatible with Traxxas® High Current Connector, NiMH only)
The Traxxas parallel Y-harness lets you combine two 7.2V NiMH batteries for extra-long run time in 1/16 scale vehicles. Dual-battery operation requires
The Traxxas parallel Y-harness lets you combine two 7.2V NiMH batteries for extra-long run time in 1/16 scale vehicles. Dual-battery operation requires
$8.00
Sensor, temperature & voltage (fits X-Maxx®)
The temperature/voltage sensor plugs directly into your TQi™ receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a TQi radio wit
The temperature/voltage sensor plugs directly into your TQi™ receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a TQi radio wit
$12.00
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)
Replacement part for these models:
Drag Slash
Maxx®
Slash 4X4 Ultimate
Replacement part for these models:
Drag Slash
Maxx®
Slash 4X4 Ultimate
$2.00
Wire harness, series battery connection (compatible with Traxxas® High Current Connector, NiMH only)
The Traxxas Y-harness doubles your voltage by combining two 7.2V NiMH batteries in series to unlock the 50+mph speed potential of your 1/16 scale brushle
The Traxxas Y-harness doubles your voltage by combining two 7.2V NiMH batteries in series to unlock the 50+mph speed potential of your 1/16 scale brushle
$8.00
LED light bar (chrome, 4 clear lights)
Add lights to the front of your truck with this chrome LED light bar. Includes 4 LED lights and wiring to plug into the receiver.
Accessory part for these models:
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Add lights to the front of your truck with this chrome LED light bar. Includes 4 LED lights and wiring to plug into the receiver.
Accessory part for these models:
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
$15.00