Showingof 4293 item(s)
Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch)
$3.00
Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)
$6.75
Battery hold-down (grey) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad
$5.00
Battery hold-down (3)/ battery clip/ hold-down post/ screw pin/ pivot post screw (fits #6723R chassis with 162mm long battery compartment)
$8.00
Wheelie bar, assembled (fits all Maxx® trucks)
$20.00
Turnbuckles, camber link, 47mm (67mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right)
$7.00
Wheels, 1.0", Method Race Wheels® 105 Beadlock (satin black chrome with blue beadlock) (2)
$7.20
Battery hold-down plate (grey) / metal posts (2) / body clips (2)
$3.00
Wheels, wheelie bar, 6061-T6 aluminum (dark titanium-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)
$39.95
Wire harness, series battery connection (compatible with Traxxas® High Current Connector, NiMH only)
$8.00
Oil, differential (50K wt) (1.7 oz (50cc))
$7.50
Powerhobby Traxxas TRX-4M 1/18 Sealed Complete Bearing Kit
$24.99
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)
$8.00
Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2)
$9.00
Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3)
The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi r
The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi r
$3.00
Spur gear, 38-tooth (1.0 Module)
38-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Pleas
38-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Pleas
$3.00
Wiring harness for RX Power Pack, Traxxas® nitro vehicles except Revo® (includes on/off switch and charge jack
$5.00
Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
$5.00
STUB AXLE EXTENDED PORTAL DRVE
Stub axle, extended thread (portal drive) (2)
Stub axle, extended thread (portal drive) (2)
$6.50
Bulkhead (front) (black)
$6.00
The 2075 digital ball bearing servo provides precise control, quick responses, and outstanding torque with a waterproof case for worry-free driving in water, mud, and snow. Features 125 oz-in torque and 0.16-second speed.
$39.95
Ring gear, differential/ pinion gear, differential
1/16 scale differential ring and pinion gears
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
1/16 scale differential ring and pinion gears
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
$12.00
Body mounts, front & rear/ body mount posts, front & rear
Front and rear body mounts with front and rear adjustable body posts
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
Front and rear body mounts with front and rear adjustable body posts
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
$6.00