Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different runni
Showingof 4246 item(s)
Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different runni
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different runni
$5.95
Screws, 4x6mm button-head machine (hex drive) (with threadlock) (6)
Screws, 4x6mm button-head machine (hex drive) (with threadlock) (6)
Replacement part for these models:
E-Revo® VXL Brushless
Revo®
Slayer® Pro 4X4
Sledge™
Summit
Screws, 4x6mm button-head machine (hex drive) (with threadlock) (6)
Replacement part for these models:
E-Revo® VXL Brushless
Revo®
Slayer® Pro 4X4
Sledge™
Summit
$3.00
Screws, 4x10mm button-head machine (hex drive) (6)
Screws, 4x10mm button-head machine (hex drive) (6)
Replacement part for these models:
E-Revo® VXL Brushless
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Maxx®
Revo®
Rustler® 4X4 VXL
Slash 4X4 Platinum
S
Screws, 4x10mm button-head machine (hex drive) (6)
Replacement part for these models:
E-Revo® VXL Brushless
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Maxx®
Revo®
Rustler® 4X4 VXL
Slash 4X4 Platinum
S
$2.50
Idler gear, 13T (1st speed gear)
Idler gear, 13T (1st speed gear)
Replacement part for these models:
Summit
SummitSummit: TQi™ Traxxas Link™ Enabled 2.4GHz Radio (Model# 56076-4)
Idler gear, 13T (1st speed gear)
Replacement part for these models:
Summit
SummitSummit: TQi™ Traxxas Link™ Enabled 2.4GHz Radio (Model# 56076-4)
$6.00
Output gear, 33-tooth (1)/ spacers (2)
Output gear, 33-tooth (1)/ spacers (2)
Accessory part for these models:
Summit
SummitSummit: TQi™ Traxxas Link™ Enabled 2.4GHz Radio (Model# 56076-4)
Output gear, 33-tooth (1)/ spacers (2)
Accessory part for these models:
Summit
SummitSummit: TQi™ Traxxas Link™ Enabled 2.4GHz Radio (Model# 56076-4)
$3.00
Screws, 3x8mm flat-head machine (hex drive) (6)
$2.50
Screw pin set (Rustler/ Bandit/ Stampede)
$4.50
Battery hold-down plate (black)/ metal posts (2)/body clips (2)
$3.00
Mounting plate, electronic speed control (for installation of XL-5/VXL into Bandit® or Rustler®)
$3.00
Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad
Battery hold-down (grey) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo
Battery hold-down (grey) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo
$5.00
Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.
Replacement par
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment.
Replacement par
$7.00
Camber link set (plastic/ non-adjustable) (front & rear) (black)
Camber link set (plastic/ non-adjustable) (front & rear) (black)
Replacement part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Accessory part for these models:
Rustler®
Camber link set (plastic/ non-adjustable) (front & rear) (black)
Replacement part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Accessory part for these models:
Rustler®
$3.00
Wheelie bar, assembled (green) (fits Slash, Bandit®, Rustler®, Stampede® series)
$15.00
Gearbox halves (L&R) (grey) w/ idler gear shaft
$8.00
The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations).
$10.00
Rebuild kit, Velineon® 3500 and 540XL (includes plastic endbell, 5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing)
$13.00
Exhaust header gasket (1)/ gaskets, pressure fitting (2) (for side exhaust engines only)
$1.75
Battery holder, 4-cell (no on/off switch) (for Jato and others that use a male Futaba style connector)
$4.00
Motor (EZ-Start®)
Motor (EZ-Start)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
Motor (EZ-Start)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
$12.00
Clutch bell, (24-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear rat
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear rat
$12.00