Bottle, fuel filler (500cc)
The fuel bottle holds 500cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and o-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are not meant for long-te
Showingof 9914 item(s)
Body mounts & posts, front & rear (complete set)
Front and rear body posts and mounts. Includes screws.
Replacement part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® Equipped with Traxx®
TRX-4® Scale and Trail™ Cra
Front and rear body posts and mounts. Includes screws.
Replacement part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® Equipped with Traxx®
TRX-4® Scale and Trail™ Cra
$8.00
Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for #9550 front or #9654X rear steel CV driveshafts)
Replacement part for these models:
Sledge™
Replacement part for these models:
Sledge™
$5.00
Suspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
Replace the stock screw pins with these heavy-duty steel suspension pins that are stronger, fit more precisely, and pivot with less friction. These are required hardware for
Replace the stock screw pins with these heavy-duty steel suspension pins that are stronger, fit more precisely, and pivot with less friction. These are required hardware for
$2.50
M3 Aluminum Lock Nuts, Black (10)
Item No.
Team Losi Racing - TLR336004
Item No.
Team Losi Racing - TLR336004
$11.99
Arrma 1/5 Kraton EXB Extreme Sealed Bearing Kit
Item No.
FastEddy Bearings - TFE6949
Item No.
FastEddy Bearings - TFE6949
$29.44
Input shaft, transmission (cush drive)
Replacement part for these models:
X-Maxx®
Replacement part for these models:
X-Maxx®
$6.00
Housing, cush drive (front & rear halves)
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
X-Maxx®
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
X-Maxx®
$3.00
Output gear, 51-tooth, metal (requires #7785X input gear)
Steel 51-tooth output gear for X-Maxx. Requires #7785X steel input gear.
Replacement part for these models:
X-Maxx®
Steel 51-tooth output gear for X-Maxx. Requires #7785X steel input gear.
Replacement part for these models:
X-Maxx®
$12.00
Differential, front, complete (fits X-Maxx® 8s)
The Pro Built front differential comes completely assembled and ready to install in your X-Maxx. Includes bearings.
Accessory part for these models:
X-Maxx®
STUDIO
Complete Front Differential (#7880)
The Pro Built front differential comes completely assembled and ready to install in your X-Maxx. Includes bearings.
Accessory part for these models:
X-Maxx®
STUDIO
Complete Front Differential (#7880)
$59.95
Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
17-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can
17-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can
$4.00
Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)
54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear
54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear
$18.00
Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shaft (2)/ output shaft (2)/ 2.5X13.8 pin (2))
Replacement part for these models:
Maxx®
Replacement part for these models:
Maxx®
$18.00
Servo connector, Y adapter (for dual-servo steering)
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
Accessory part for these models:
Slayer® Pro 4X4
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
Accessory part for these models:
Slayer® Pro 4X4
$4.00
Steering bellcranks (L&R)/ draglink
Left and right steering bellcranks with drag link
Replacement part for these models:
Bandit® VXL
Bandit®
Ford® F-150 Raptor
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Accesso
Left and right steering bellcranks with drag link
Replacement part for these models:
Bandit® VXL
Bandit®
Ford® F-150 Raptor
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Accesso
$4.00
Input shaft (slipper shaft) / spring pin
Replacement input shaft (slipper clutch shaft) for Magnum 272 transmissions. Does not fit Magnum 272R transmissions
Replacement part for these models:
Bandit® VXL
Replacement input shaft (slipper clutch shaft) for Magnum 272 transmissions. Does not fit Magnum 272R transmissions
Replacement part for these models:
Bandit® VXL
$3.00
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings.
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Off
Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings.
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Off
$2.00
Ball bearings, blue rubber sealed (5x11x4mm) (2)
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 A
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 A
$3.50
Screws, set (grub) 4mm (6) (with threadlock)
Set of six 4 mm set screws (grub screws) with threadlock
Replacement part for these models:
E-Revo® VXL Brushless
Jato®
Nitro Slash
Revo®
Slayer® Pro 4X4
Summit
T-Maxx®
TRX® 2.5R
TRX® 3.3
Set of six 4 mm set screws (grub screws) with threadlock
Replacement part for these models:
E-Revo® VXL Brushless
Jato®
Nitro Slash
Revo®
Slayer® Pro 4X4
Summit
T-Maxx®
TRX® 2.5R
TRX® 3.3
$3.00
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
The Traxxas heavy-duty driveshaft comes pre-assembled and ready to install. It's a step up from standard driveshafts with improved performance an
The Traxxas heavy-duty driveshaft comes pre-assembled and ready to install. It's a step up from standard driveshafts with improved performance an
$10.00
Suspension arms, long (rear)
Replacement left and right rear suspension arms
Replacement part for these models:
Bandit® VXL
Bandit®
Replacement left and right rear suspension arms
Replacement part for these models:
Bandit® VXL
Bandit®
$8.00
Spur gear, 54-tooth, steel (1.0 metric pitch)
54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help bala
54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help bala
$18.00