Driveshaft assembly, front & rear (4)
Driveshaft assembly, front & rear (4)
Replacement part for these models:
1/18 LaTrax® Rally
1/18 LaTrax® Rally1/18 LaTrax® Rally (Model# 75054-5)
Showingof 9914 item(s)
Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch)
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consu
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consu
$3.00
Hanger, metal wire (for Resonator pipe in T-Maxx® with long wheelbase)/ telemetry sensor wire hold-down clip
Replacement part for these models:
T-Maxx®
T-Maxx®T-Maxx®: TRX® 3.3, TQi™ 2.4GHz Radio System, Traxxas Link™ Wireless Module, & TSM® (Model#
Replacement part for these models:
T-Maxx®
T-Maxx®T-Maxx®: TRX® 3.3, TQi™ 2.4GHz Radio System, Traxxas Link™ Wireless Module, & TSM® (Model#
$2.00
urnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber links)
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment. (Requires #2742 rod ends/ball connectors)
Replacement part for th
Replace your non-adjustable camber links with these versatile metal turnbuckles that allow trackside camber adjustment. (Requires #2742 rod ends/ball connectors)
Replacement part for th
$2.00
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Designed for extreme performance applications, the front extreme heavy-duty U-joint driveshaft adds extra material to critical areas for
Designed for extreme performance applications, the front extreme heavy-duty U-joint driveshaft adds extra material to critical areas for
$12.00
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11mm BB (2))
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11mm BB (2))
Replacement part for these models:
T-Maxx®
T-Maxx
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11mm BB (2))
Replacement part for these models:
T-Maxx®
T-Maxx
$12.00
Bellcrank bushings (plastic) (5x8x2.5mm) (4)
$3.00
COR00180-360
CVD Drive Shaft - Short - Front - 1 pc: Python
CVD Drive Shaft - Short - Front - 1 pc: Python
$21.00
COR00180-089
Anti-Roll Bar Ball Cups - Composite - 4 pcs: Dementor, Kronos, Python, Shogun
Anti-Roll Bar Ball Cups - Composite - 4 pcs: Dementor, Kronos, Python, Shogun
$5.20
Turnbuckles, aluminum (green-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
Traxxas’ aluminum toe links make it easy to add strength and adjustability to your Traxxas model. These toe links come
Traxxas’ aluminum toe links make it easy to add strength and adjustability to your Traxxas model. These toe links come
$12.00
Driveshafts, steel constant-velocity (assembled), rear (2)
One-piece steel rear driveshafts save weight and send power directly to the wheels for lightning quick response times. Driveshafts come pre-assembled and ready to install.
One-piece steel rear driveshafts save weight and send power directly to the wheels for lightning quick response times. Driveshafts come pre-assembled and ready to install.
$26.95
Toe links, Revo® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (128mm, fits front or rear) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)
Traxxas TUBES aluminum toe links are lighter than steel and stronger than titani
Traxxas TUBES aluminum toe links are lighter than steel and stronger than titani
$25.00
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
Extreme heavy-duty steel CV (constant velocity) driveshafts are engineered to satisfy the performance and durability needs of the most demanding drivers. Designed specifically fo
Extreme heavy-duty steel CV (constant velocity) driveshafts are engineered to satisfy the performance and durability needs of the most demanding drivers. Designed specifically fo
$79.95
COR00180-207
Steering Block Arms - Aluminum - 2 pcs: Dementor, Kronos, Python, Shogun
Steering Block Arms - Aluminum - 2 pcs: Dementor, Kronos, Python, Shogun
$7.40
COR00180-372
Servo Arm - Steering - Aluminum: Dementor, Kronos, Python, Shogun
Servo Arm - Steering - Aluminum: Dementor, Kronos, Python, Shogun
$10.60
Slide carb linkage set (throttle link, brake link, and hardware)
$6.00
Steering block (2)
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford® GT
Ford® Mustang GT
Toyota® GR Supra GT4®
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford® GT
Ford® Mustang GT
Toyota® GR Supra GT4®
$4.00
Window nets (2)/ 2.5x8mm CS (8)
Accessory part for these models:
Unlimited Desert Racer®
Unlimited Desert Racer®Unlimited Desert Racer®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 85086-4)
Accessory part for these models:
Unlimited Desert Racer®
Unlimited Desert Racer®Unlimited Desert Racer®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 85086-4)
$21.00
Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))
$3.00
HRAXMX13M06
Rear Differential Cover for Traxxas X-Maxx
Hot Racing X-Maxx Rear Differential Cover
Features:
CNC 6061 Aluminum Blue anodized aluminum
Rear Differential Cover for Traxxas X-Maxx
Hot Racing X-Maxx Rear Differential Cover
Features:
CNC 6061 Aluminum Blue anodized aluminum
$28.88
Cooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)
Lower your Velineon brushless motor’s temperatures with this cooling fan and shroud. The fan shroud screws onto the #3458 heat sink (sold separately) to draw
Lower your Velineon brushless motor’s temperatures with this cooling fan and shroud. The fan shroud screws onto the #3458 heat sink (sold separately) to draw
$24.95