DR10 Drag Race Car, 1/10 Brushless 2WD RTR, Orange

Team Associated ASC70025 DR10 Drag Race Car, 1/10 Brushless 2WD RTR, Orange

SKU: ASC70025

$349.99

Excl. tax

ASC70025

DR10 Drag Race Car, 1/10 Brushless 2WD RTR, Orange
Street Racing -- An unsanctioned form of auto racing which occurs on public roads. Racing in the streets is centuries old and started well before the automobile, but auto racing started the

Overview

Modern street racing's roots go back to Woodward Avenue, Michigan in the 1960s when the three main Detroit-based American car companies were producing high-powered performance cars. A private racing venue was not always available, and therefore the race would be held illegally on public roads.

The DR10 Drag Race Car is based on the 9-time R.O.A.R. Short Course National Championship winning trucks. The DR10 features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as the ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box.

Features

Based on the 9-time R.O.A.R. National Champion short-course race truck platform
2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
Three-position wheelie bar with optional large wheels
High-torque, metal-gear Reedy servo with spring style servo saver
Powerful Reedy 3300kV brushless motor
Reedy 3300kV brushless motor
Lightweight front drag tires
Durable and lightweight aluminum top shaft

Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs
Metric hardware throughout
18 precision, rubber-sealed ball bearings
Durable front and rear wide body mounts
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
Adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Many Factory Team options already available!

Product Details

In The Box

(1) DR10 Drag Race Car RTR
(1) 2.4GHz 2-channel radio
(1) High-torque, metal-gear Reedy servo
(1) Reedy Brushless Speed Control
(1) Product Manual

Needed to Complete

(4) AA batteries (#ASC302 Reedy AA Alkaline) used in the transmitter
NiMH or LiPo battery with High Current T-Plug (#ASC724 Reedy 7-cell WolfPack or #ASC751 Reedy WolfPack LiPo)
Charger for battery used (#ASC27201 Reedy balance Charger - good for LiPo, LiFe)

Video Overview

Video Unboxing

Factory-finished two-piece Reakt drag race body with rear spoiler

Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo

Aluminum 12mm big bore coil-over shock absorbers

Three-position wheelie bar with optional large wheels

Rugged steel turnbuckles for adjustable camber and front toe-in

Water-resistant enclosed receiver box

Rear CVA driveshafts for more reliability

Lightweight drag race-inspired wheels with high-grip rear drag slick tires

Product Specifications

Internal Gear Ratio	2.6:1
Product Length	24" (609.6mm)
Approximate Assembly Time	No assembly required
Scale	1/10
Motor Type	Brushless
Speed Control	Included
Wheelbase	12.68" (322mm)
Product Weight	10.70" (272mm)
Tire Tread	Slick
Vehicle Type	Drag Car
Water-Resistant	Yes
Suspension	Adjustable suspension geometry
Ball Bearings	18 precision, rubber-sealed ball bearings
Chassis	Low center-of-gravity molded composite
Completion Level	Ready-To-Run
Drivetrain	2WD
Charger	Sold Separately
Receiver	Included
Shock Type	Aluminum 12mm big bore coil-over
Battery Tray Dimensions	L, W, H: 5.5 x 1.8 x 0.96" (139 x 47 x 24.5mm)
Product Width	10.7" (272mm)
Radio	Included
Power Type	Electric