Showingof 20156 item(s)
Traxxas 5559 Mounts, suspension pin (rear anti-squat blocks) (1.5, 2.25, 3.0 & 3.75 degree) (1 each)
Traxxas 5559 Mounts, suspension pin (rear anti-squat blocks) (1.5, 2.25, 3.0 & 3.75 degree) (1 each)
$3.50
Traxxas 5555 Carriers, stub axle (rear) (left & right)
$3.50
Traxxas 2519 Differential gear (60-tooth) (for optional ball differential only)
$3.50
Traxxas 5341X Linkage, steering (Revo®) (3x30mm turnbuckle) (2)/ rod ends (4)/ hollow balls (4)
$3.50
Steering drag link/ 3x10mm shoulder screws (without threadlock) (2)
$3.50
Traxxas 5529 Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
$3.50
Traxxas 8941 Suspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel)
$3.50
Traxxas 5115A Ball bearings, black rubber sealed (5x10x4mm) (2)
$3.50
Traxxas 6746 Gear, 10-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
$3.50
Traxxas 8022 Fuel canisters (red) (2)/ 3x8 FCS (1)
$3.50
Traxxas 3967 Shoulder screws 3x10 (6) (without threadlock)
$3.50
Traxxas 3966 Shoulder screws, 3x10mm (6) (with threadlock)
$3.50
Traxxas 3962 Set (grub) screws, 3x25mm (8)/ 3mm nylon locknuts (8)
$3.50
Traxxas 4918A Servo mounts, steering/shift (f&r) (gray)
$3.50
Traxxas 7077R Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1)
$3.50
Traxxas 3940 Screws, 4x4mm button-head machine, aluminum (blue) (hex drive) (6)
$3.50
Ball bearings, blue rubber sealed (5x11x4mm) (2)
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 A
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 A
$3.50
Cover, gear/ rubber gear cover plug/ 3x6 RM (2)
Replacement gear cover for Magnum 272 transmissions. Includes gear cover plug and 3x6 mm screws.
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Drag
Replacement gear cover for Magnum 272 transmissions. Includes gear cover plug and 3x6 mm screws.
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Drag
$3.50
Gear, 16-T pinion (48-pitch) / set screw
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual f
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual f
$3.50
Shafts, idler gear (lightweight 7075-T6 aluminum hard-anodized/ PTFE-coated)
$3.50