Ball bearings, blue rubber sealed (5x11x4mm) (2)
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 A
Showingof 20156 item(s)
Mount, motor cooling fan (fits #3458 heat sink)
Replacement part for these models:
Maxx®
Maxx®Maxx®: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model# 89086-4)
Maxx®Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 89076-4)
Replacement part for these models:
Maxx®
Maxx®Maxx®: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model# 89086-4)
Maxx®Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 89076-4)
$4.00
Steering block (2)
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford® GT
Ford® Mustang GT
Toyota® GR Supra GT4®
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford® GT
Ford® Mustang GT
Toyota® GR Supra GT4®
$4.00
Body mount (1)/ body mount post (2)/ body post extensions (2) (front or rear)
$4.00
Caster blocks (left & right) (30-degree)
$4.00
Rod ends (long) (6)/ hollow ball connectors (6)
$4.00
Hot Racing 31mm Modular Aluminum Differential Case Rebuild kit
$4.00
Wheelie bar mount (1)/ hardware (black)
Replacement mount for the Traxxas #3678 wheelie bar. Use Part #4974 and 4976 to complete the wheelie bar assembly.
Replacement part for these models:
Bandit® VXL
BIGFOOT® No. 1 Officially Licensed Replica
Ford®
Replacement mount for the Traxxas #3678 wheelie bar. Use Part #4974 and 4976 to complete the wheelie bar assembly.
Replacement part for these models:
Bandit® VXL
BIGFOOT® No. 1 Officially Licensed Replica
Ford®
$4.00
Battery holder, 4-cell (no on/off switch) (for Jato and others that use a male Futaba style connector)
$4.00
Shock tower, rear
Shock tower, rear
Replacement part for these models:
Nitro Rustler®
Nitro Rustler®Nitro Rustler®: TRX® 2.5, TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 44096-3)
Nitro Slash
Nitro SlashNitro Slash: TRX® 3.3, TQi™ Traxxas
Shock tower, rear
Replacement part for these models:
Nitro Rustler®
Nitro Rustler®Nitro Rustler®: TRX® 2.5, TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 44096-3)
Nitro Slash
Nitro SlashNitro Slash: TRX® 3.3, TQi™ Traxxas
$4.00
Ball bearings, blue rubber sealed (8x12x3.5mm) (2)
Ball bearings, blue rubber sealed (8x12x3.5mm) (2)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
Maxx®
Unlimited Desert Racer®
Ball bearings, blue rubber sealed (8x12x3.5mm) (2)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
Maxx®
Unlimited Desert Racer®
$4.00
Input gear, transmission, 22-tooth/ 2.5x12mm pin
$4.00
Rebuild kit, driveshaft (cross pin (2)/ 16mm pin (2)) (metal parts for 2 driveshafts)
$4.00
Differential output yokes (2)/ 3x5mm countersunk screws (2)/ 3mm set (set) screws (4)
Differential output yokes (2)/ 3x5mm countersunk screws (2)/ 3mm set (set) screws (4)
Replacement part for these models:
Nitro Rustler®
Nitro Rustler®Nitro Rustler
Differential output yokes (2)/ 3x5mm countersunk screws (2)/ 3mm set (set) screws (4)
Replacement part for these models:
Nitro Rustler®
Nitro Rustler®Nitro Rustler
$4.00
Wheels (4)/ axles (2) (for T-Maxx®/E-Maxx wheelie bar)
Wheels (2)/ Axles (2), for standard wheelie bar
Replacement part for these models:
Jato®
Stampede® 4X4 VXL
Stampede® VXL
T-Maxx®
Accessory part for these models:
Bandit® VXL
Bandit®
BIGFOOT®
Wheels (2)/ Axles (2), for standard wheelie bar
Replacement part for these models:
Jato®
Stampede® 4X4 VXL
Stampede® VXL
T-Maxx®
Accessory part for these models:
Bandit® VXL
Bandit®
BIGFOOT®
$4.00
Exhaust tip, rubber (7mm i.d. for N. Stampede®) (1)
Exhaust tip, rubber (7mm i.d. for N. Stampede) (1)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
Exhaust tip, rubber (7mm i.d. for N. Stampede) (1)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
$4.00
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licen
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licen
$4.00
