Showingof 20156 item(s)
Traxxas 6489X Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
$4.00
Traxxas 6488X Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
$4.00
Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
15-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can
15-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can
$4.00
PINION 12-T 1.0 MP 5MM SHAFT
Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
$4.00
Traxxas 8280R Differential cover, front or rear (red)
$4.00
Traxxas 8280A Differential cover, front or rear (black)
$4.00
Traxxas 9542 Suspension pins, outer, front, 3.5x48.2mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)
$4.00
Traxxas 9541 Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2)
$4.00
Traxxas 3677P Wheelie bar mount (1) / hardware (pink)
$4.00
Traxxas 3677A Wheelie bar mount (1) / hardware (green)
$4.00
Traxxas 8459 Spring retainers, lower (captured) (4)/ 2.5x10 CS (4)
$4.00
Traxxas 7455 Driveshaft, center, plastic (black)/ screw pin
$4.00
Traxxas 5124 Ball bearings, blue rubber sealed (4x7x2.5mm) (2)
$4.00
Ball bearings, blue rubber sealed (6x10x3mm) (2)
$4.00
Traxxas 7435 Skidplate, front (angled for higher ground clearance) (use with #7434 foam body bumper)
Traxxas 7435 Skidplate, front (angled for higher ground clearance) (use with #7434 foam body bumper)
$4.00
Traxxas 7434 Body bumper, foam (low profile) (use with #7435 front skidplate)
$4.00
Traxxas 5914X Gear, center differential (Slayer)/ Cover (1) / X-ring seals (2)/ gasket (1)/ 6x10x0.5 TW (2) (Replacement gear for 5914)
$4.00