Showingof 5434 item(s)
Traxxas 7951 LED lens, front, red (left & right)
$4.00
Traxxas 7950 LED lens, front, clear (left & right)
$4.00
Traxxas 6624 Main frame, lower (black) / 1.6x5mm BCS (self-tapping) (4)
$4.00
Traxxas 3925 Seal kit, receiver box (includes o-ring, seals, and silicone grease)
$4.00
Traxxas 5349 Rod ends, small, with hollow balls (6) (for Revo® steering linkage)
$4.00
Traxxas 6565 MAXX® Link cable, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)
$4.00
Traxxas 1523 Battery holder with on/off switch/ rubber on/off switch cover
$4.00
Traxxas 1221 Wheels, white (rear) (2) (Tom Cat)
$4.00
Input gear, transmission, 20-tooth/ 2.5x12mm pin
Replacement part for these models:
X-Maxx®
Replacement part for these models:
X-Maxx®
$4.00
Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
17-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can
17-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can
$4.00
Servo connector, Y adapter (for dual-servo steering)
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
Accessory part for these models:
Slayer® Pro 4X4
The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering.
Accessory part for these models:
Slayer® Pro 4X4
$4.00
Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
11-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-
11-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Designed for steel spur gears. Traxxas pinion gears let you fine-
$4.00
Steering bellcranks (L&R)/ draglink
Left and right steering bellcranks with drag link
Replacement part for these models:
Bandit® VXL
Bandit®
Ford® F-150 Raptor
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Accesso
Left and right steering bellcranks with drag link
Replacement part for these models:
Bandit® VXL
Bandit®
Ford® F-150 Raptor
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Accesso
$4.00
Ball bearings, blue rubber sealed (5x11x4mm) (2)
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 A
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 A
$4.00
Mount, motor cooling fan (fits #3458 heat sink)
Replacement part for these models:
Maxx®
Maxx®Maxx®: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model# 89086-4)
Maxx®Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 89076-4)
Replacement part for these models:
Maxx®
Maxx®Maxx®: TQi Traxxas Link Enabled 2.4GHz Radio & TSM (Model# 89086-4)
Maxx®Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 89076-4)
$4.00
Steering block (2)
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford® GT
Ford® Mustang GT
Toyota® GR Supra GT4®
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford® GT
Ford® Mustang GT
Toyota® GR Supra GT4®
$4.00
Body mount (1)/ body mount post (2)/ body post extensions (2) (front or rear)
$4.00
Caster blocks (left & right) (30-degree)
$4.00