Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different runni
Showingof 5434 item(s)
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different runni
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different runni
$5.95
Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different runni
Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different runni
$5.95
Traxxas 3152 Exhaust pipe, rubber (N. Hawk/Buggy/Street)
$5.75
Traxxas 3996X Idler gear, 20-tooth/ idler gear shaft
$5.50
Traxxas 7623 Upper chassis (long)/ battery hold down
$5.50
Traxxas 7533 Suspension pin set, complete (front & rear) / hardware
$5.50
Bullet connectors, male, 3.5mm (3)/ heat shrink
Male 3.5 mm bullet connectors (3) with heat shrink tubing
Replacement part for these models:
Bandit® VXL
Rustler® VXL
Stampede® VXL
Male 3.5 mm bullet connectors (3) with heat shrink tubing
Replacement part for these models:
Bandit® VXL
Rustler® VXL
Stampede® VXL
$5.50
Traxxas 2668 Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
$5.50
Portal drive housing, inner, front (left & right)/ 2.5x4 BCS (6)
Inner front portal drive housings (L&R) with 2.5x4 mm screws (6)
Inner front portal drive housings (L&R) with 2.5x4 mm screws (6)
$5.50
Traxxas 2063A Servo case/gaskets (for 2065A waterproof sub-micro servo)
$5.50
Traxxas 3989 Shift fork shaft assembly/ shift shaft seal
$5.50
Mirrors, side, black (left & right)/ retainers (2)/ body clips (4) (fits #8010 body)
Black side mirrors for the 1979 Bronco body. Includes hardware.
Replacement part for these models:
TRX-4® 1979 Ford® Bronco
Accessory part for these models:
TRX-4® 1
Black side mirrors for the 1979 Bronco body. Includes hardware.
Replacement part for these models:
TRX-4® 1979 Ford® Bronco
Accessory part for these models:
TRX-4® 1
$5.50
Traxxas 4844 Adapter nut, clutch/ 3x10mm cap screw/washer/ split washer (not for use with IPS crankshafts)
$5.25
Traxxas 4144 Adapter nut, clutch (not for use with IPS crankshafts)
$5.25
Camber links, rear (molded composite) (56mm center to center) (2) (assembled with hollow balls) (for use with #9182 upgrade kit)
$5.00
