Mount, telemetry expander (requires #6730 chassis brace kit)
The telemetry expander mount fits over the 6730 chassis brace to provide a secure base to mount the optional TQi™ Telemetry Expander.
Accessory part for these models:
Rustler® 4X4 VXL
Rustle
Showingof 5434 item(s)
Slipper pressure plate & hub (aluminum alloy)
Replacement standard-duty aluminum alloy pressure plate and hub. Use with #5552X standard-duty clutch rebuild kit.
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed
Replacement standard-duty aluminum alloy pressure plate and hub. Use with #5552X standard-duty clutch rebuild kit.
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed
$8.00
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)
Replacement part for these models:
Nitro Slash
Slash 4X4 Platinum
Slash
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)
Replacement part for these models:
Nitro Slash
Slash 4X4 Platinum
Slash
$8.00
uspension arm set, front (includes upper right & left and lower right & left arms)
Suspension arm set, front (includes upper right & left and lower right & left arms)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Summit™
Suspension arm set, front (includes upper right & left and lower right & left arms)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Summit™
$8.00
Bumper, front/ winch
Front bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronc
Front bumper with replica winch for TRX-4® models.
Replacement part for these models:
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronc
$8.00
Wire harness, parallel battery connection (compatible with Traxxas® High Current Connector, NiMH only)
The Traxxas parallel Y-harness lets you combine two 7.2V NiMH batteries for extra-long run time in 1/16 scale vehicles. Dual-battery operation requires
The Traxxas parallel Y-harness lets you combine two 7.2V NiMH batteries for extra-long run time in 1/16 scale vehicles. Dual-battery operation requires
$8.00
Rod ends, heavy duty (push rod) (8) (assembled with hollow balls) (replacement ends for #8619, 8619G, 8619R, 8619X)
Replacement part for these models:
E-Revo® VXL Brushless
Replacement part for these models:
E-Revo® VXL Brushless
$8.00
Gearbox halves (l&r) (black) w/ idler gear shaft
$8.00
Half shaft set, left or right (internal splined half shaft/ external splined half shaft/ rubber boot/ metal U-joints) (assembled with glued boot) (2 assemblies)
$8.00
Body reinforcement set (fits #8611 body)
Traxxas body reinforcement sets provide added protection for your E-Revo during extreme driving. These high-strength composite reinforcements help spread impact forces through the body, ensuring long-lasting fun t
Traxxas body reinforcement sets provide added protection for your E-Revo during extreme driving. These high-strength composite reinforcements help spread impact forces through the body, ensuring long-lasting fun t
$8.00
Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear)
$8.00
Wire harness, series battery connection (compatible with Traxxas® High Current Connector, NiMH only)
The Traxxas Y-harness doubles your voltage by combining two 7.2V NiMH batteries in series to unlock the 50+mph speed potential of your 1/16 scale brushle
The Traxxas Y-harness doubles your voltage by combining two 7.2V NiMH batteries in series to unlock the 50+mph speed potential of your 1/16 scale brushle
$8.00
Ball bearing, black rubber sealed (17x26x5mm) (2)
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
TRX-4® Equipped with Traxx®
TRX-4® Traxx® All-Terrain Track Set
X-Maxx®
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
TRX-4® Equipped with Traxx®
TRX-4® Traxx® All-Terrain Track Set
X-Maxx®
$8.00
Ball bearings, blue rubber sealed (12x21x5mm) (2)
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
$8.00
Half shafts, center (front and rear) (external-splined (2)/ internal-splined (2))/ metal u-joints (4)
$8.00
Mount, telemetry expander (fits #3622 or 3622A chassis)
The telemetry expander mount provides a secure base to mount the optional TQi™ Telemetry Expander. Fits #3622 or #3622A chassis only.
The telemetry expander mount provides a secure base to mount the optional TQi™ Telemetry Expander. Fits #3622 or #3622A chassis only.
$8.00
Mount, telemetry expander (fits Funny Car, Nitro 4-Tec®)
$8.00
Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)
Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)
Replacement part for these models:
Ford® Fiesta® ST Rally
Slash 4X4 Platinum
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampe
Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)
Replacement part for these models:
Ford® Fiesta® ST Rally
Slash 4X4 Platinum
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampe
$8.00
Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)
Extreme heavy-duty differential output yoke assemblies with internal-spline half shafts. Fits front or rear. Sold as a
Extreme heavy-duty differential output yoke assemblies with internal-spline half shafts. Fits front or rear. Sold as a
$8.00
Axle carriers, left & right (1 each)
Axle carriers, left & right (1 each)
Replacement part for these models:
T-Maxx®
Axle carriers, left & right (1 each)
Replacement part for these models:
T-Maxx®
$8.00
Clutch shoes (2)/ spring
Clutch shoes with spring for T-Maxx®, Revo®, Jato®, and Nitro 4-Tec®.
Clutch shoes with spring for T-Maxx®, Revo®, Jato®, and Nitro 4-Tec®.
$7.75
Traxxas Suspension arm upper (1)/ suspension arm lower (1) (right rear) DISCONTINUED 5933
$7.50