Turnbuckles, aluminum (green-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
Traxxas’ aluminum toe links make it easy to add strength and adjustability to your Traxxas model. These toe links come
Showingof 5434 item(s)
Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
Traxxas’ aluminum toe links make it easy to add strength and adjustability to your Traxxas model. These toe links come
Traxxas’ aluminum toe links make it easy to add strength and adjustability to your Traxxas model. These toe links come
$12.00
Caster blocks (c-hub), left & right/ kingpin bushings (4)
$12.00
Balance Lead Adapter (2938X)
The Traxxas Balance Lead Adapter connects batteries to the accessory LiPo Cell Voltage Checker (#2968) to check battery charge status and individual cell voltages. View LiPo cell status and overall battery charge in the fie
The Traxxas Balance Lead Adapter connects batteries to the accessory LiPo Cell Voltage Checker (#2968) to check battery charge status and individual cell voltages. View LiPo cell status and overall battery charge in the fie
$12.00
Motor (EZ-Start®)
Motor (EZ-Start)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
Motor (EZ-Start)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
$12.00
Clutch bell, (24-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear rat
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear rat
$12.00
High-speed needle valve & seat assembly (w/ securing nut)
High-speed needle valve & seat assembly (w/ securing nut)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
High-speed needle valve & seat assembly (w/ securing nut)
Replacement part for these models:
TRX® Pro .15
TRX® Pro .15TRX® Pro .15 (Model# 4007)
$12.00
Ball bearings, blue rubber sealed (4x8x3mm) (8)
Replacement part for these models:
Unlimited Desert Racer®
Unlimited Desert Racer®Unlimited Desert Racer®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 85086-4)
Replacement part for these models:
Unlimited Desert Racer®
Unlimited Desert Racer®Unlimited Desert Racer®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 85086-4)
$12.00
Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)
$12.00
Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear r
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear r
$12.00
Ring gear, 37-T/ 13-T pinion/ diff carrier/6x10x0.5mm PTFE-coated washer (1)/ 2x8mm countersunk machine screws (4)
$12.00
Clutch bell, (20-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2)
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear rati
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear rati
$12.00
Spool, differential (eliminates differential. Use off-road only) (requires #5379X ring gear)
This differential spool replaces the differential gears. The spool locks the axle, providing equal power to both wheels. For straight-line sand drags, rock cli
This differential spool replaces the differential gears. The spool locks the axle, providing equal power to both wheels. For straight-line sand drags, rock cli
$12.00
Spool (eliminates differential, use off-road only)(requires #4981 ring gear)
The differential spool replaces the rear differential gear. The spool locks the axle, providing equal power to both wheels no matter what the truck drives over. If you’re buil
The differential spool replaces the rear differential gear. The spool locks the axle, providing equal power to both wheels no matter what the truck drives over. If you’re buil
$12.00
Sensor, temperature and voltage (long)
The temperature/voltage sensor plugs directly into your TQi™ receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a TQi radio with Tr
The temperature/voltage sensor plugs directly into your TQi™ receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a TQi radio with Tr
$12.00
Driveshaft, center, aluminum (blue-anodized)
Upgrade your 4-Tec 2.0 with this one-piece aluminum center driveshaft. Designed for the Velineon high-power brushless system, the anodized aluminum shaft runs perfectly straight and true for superior rigidity
Upgrade your 4-Tec 2.0 with this one-piece aluminum center driveshaft. Designed for the Velineon high-power brushless system, the anodized aluminum shaft runs perfectly straight and true for superior rigidity
$12.00
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
$12.00
Gear, locking differential output/ differential slider/ 3x12mm screwpin
$12.00
Clutch bell (14-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust your truck's final drive ratio
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust your truck's final drive ratio
$12.00
lutch bell (17-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust Slayer’s final drive ratio for
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust Slayer’s final drive ratio for
$12.00
Sensor, temperature & voltage (fits X-Maxx®)
The temperature/voltage sensor plugs directly into your TQi™ receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a TQi radio wit
The temperature/voltage sensor plugs directly into your TQi™ receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a TQi radio wit
$12.00