Showingof 876 item(s)
REDS 9mm Gen 2 Carburetor Venturi (M/R Series)
$9.99
REDS 8mm Gen 2 Carburetor Venturi (R Series)
$9.99
REDS "Quattro" Off-Road Clutch Front Plate (L-M-H)
$18.99
REDS 32mm "Tetra" V3 Aluminum Off-Road Adjustable 4-Shoe Clutch System
$59.99
HPI15141
Cylinder, Piston and Connecting Rod Set, Nitro Star G3.0, or T3.0
Cylinder, Piston and Connecting Rod Set, Nitro Star G3.0, or T3.0
$72.89
RCESF4
Sure Fire #4 Medium-Cold Glow Plugs (12)
Features:
High performance element
Improves idle and acceleration
For 5% - 40% Nitro fuel
Sure Fire #4 Medium-Cold Glow Plugs (12)
Features:
High performance element
Improves idle and acceleration
For 5% - 40% Nitro fuel
$11.00
REDS 14mm Engine Bearing Tool Kit (.21 Engine)
$92.99
Flash Point Pre-Oiled Foam Air Filter (4) (HB Racing D8/Losi RC8B3)
$15.25
REDS TS4 Turbo Special Off-Road Glow Plug (Super Hot) (Japan)
$14.99
Tekno RC NB48/NT48 2.0 Pre-Oiled Air Filter Foams (3) (Red Oil)
$11.99
Klinik RC Exhaust Manifold Protection Ring (Reds/Werks)
$3.99
REDS Low Speed Needle Base O-Ring (2) (Long)
$2.99
ProTek RC 7x19x6mm "Speed" Front Engine Bearing (Samurai, O.S., Novarossi, RB)
$9.59
ProTek RC 7x19x6mm Speed Ceramic Front Engine Bearing
$14.25
ProTek RC 14x25.4x6mm Ceramic MX-Speed Rear Engine Bearing
$21.99
REDS 0.2mm Head Shim (4)OVERVIEW COMPATIBILITY
This is a pack of four replacement REDS Engines 0.2mm Head Shims. These are compatible with the REDS R5, R5C, R5T and R5TE engines. The head shim is the thin circular piece that is installed between the head
This is a pack of four replacement REDS Engines 0.2mm Head Shims. These are compatible with the REDS R5, R5C, R5T and R5TE engines. The head shim is the thin circular piece that is installed between the head
$6.99
HPI160077
Nitro Starter Pack (USB) for all HPI Nitro Cars
Everything you need to get your nitro car with pull start engine started:
- HPI Racing Fuel bottle for easy and safe filling up
- Long flat bladed screw driver for engine tuning
- Large HP
Nitro Starter Pack (USB) for all HPI Nitro Cars
Everything you need to get your nitro car with pull start engine started:
- HPI Racing Fuel bottle for easy and safe filling up
- Long flat bladed screw driver for engine tuning
- Large HP
$26.69
JCO2938M
Mini Aero Car Stand, Matte Black, for Mini-T / Mini-B
JConcepts begins the new year with fresh pit-ware for the mini vehicle racing scene. The Aero car-stand in matte black material stands out in any pit area and supports the vehicle with its
Mini Aero Car Stand, Matte Black, for Mini-T / Mini-B
JConcepts begins the new year with fresh pit-ware for the mini vehicle racing scene. The Aero car-stand in matte black material stands out in any pit area and supports the vehicle with its
$12.75